-
-#include "src/16.h"
-
-// TODO: Could we also provide a build mode to emit debug to the "Bochs E9 hack?"
-#ifdef DEBUGSERIAL
-# include <stdarg.h>
-# include <stdlib.h>
-# include <stdio.h>
-
-unsigned char _DEBUG_INITed = 0;
-struct info_8250 *_DEBUG_uart = NULL;
-
-int _DEBUG_INIT() {
- if (!_DEBUG_INITed) {
- unsigned int i;
- uint16_t port;
-
- if (!init_8250()) return 0;
-
- // what does the BIOS say the serial ports are?
- probe_8250_bios_ports();
- for (i=0;i < bios_8250_ports;i++) {
- port = get_8250_bios_port(i);
- if (port == 0) continue;
- probe_8250(port);
- }
-
- // what about the standard serial ports?
- for (i=0;i < (sizeof(standard_8250_ports)/sizeof(standard_8250_ports[0]));i++) {
- port = standard_8250_ports[i];
- if (port == 0) continue;
- probe_8250(port);
- }
-
- // pick the first port, which is probably COM1
- if (base_8250_ports == 0) return 0; // FIXME: You know "base_8250_ports" is probably a bad variable name for the max entries in info_8250_port[]
- _DEBUG_uart = &info_8250_port[0];
- _DEBUG_INITed = 1;
-
- // init the COM port.
- // in DOSBox-X, the "log" mode will receive our text and print it into the log file
- // on real hardware, our text will likely go over a null modem cable to another PC running a serial terminal program like PuTTY or minicom.
- // if nothing is connected, then the bytes go off into the ether to get lost and life goes on.
- uart_8250_enable_interrupt(_DEBUG_uart,0); // disable interrupts
- uart_8250_set_FIFO(_DEBUG_uart,0x07); // enable FIFO (why not?), also clear xmit/recv FIFO buffers, set threshhold to 1 byte
- uart_8250_set_MCR(_DEBUG_uart,3); // RTS and DTS on
- uart_8250_set_line_control(_DEBUG_uart,UART_8250_LCR_8BIT | UART_8250_LCR_PARITY); // 8 bit 1 stop bit odd parity
- uart_8250_set_baudrate(_DEBUG_uart,uart_8250_baud_to_divisor(_DEBUG_uart,9600)); // 9600 baud
- }
-
- return _DEBUG_INITed;
-}
-
-void _DEBUG(const char *msg) {
- if (_DEBUG_uart != NULL) {
- char c;
-
- while ((c=(*msg++)) != 0/*NUL*/) {
- while (!uart_8250_can_write(_DEBUG_uart)); // wait for the UART to indicate readiness for our output
- uart_8250_write(_DEBUG_uart,(uint8_t)c); // then write it
- }
- }
-}
-
-static char _DEBUGF_TMP[256];
-
-void _DEBUGF(const char *fmt,...) {
- va_list va;
-
- va_start(va,fmt);
- vsnprintf(_DEBUGF_TMP,sizeof(_DEBUGF_TMP),fmt,va);
- _DEBUG(_DEBUGF_TMP);
- va_end(va);
-}
-#endif
-
+#include "src/lib/16_dbg.h"\r
+\r
+#ifdef __DEBUG__\r
+#ifdef __DEBUG_MM__\r
+boolean dbg_debugmm=0;\r
+#endif\r
+#ifdef __DEBUG_PM__\r
+boolean dbg_debugpm=0;\r
+#endif\r
+#ifdef __DEBUG_CA__\r
+boolean dbg_debugca=0;\r
+#endif\r
+#ifdef __DEBUG_InputMgr__\r
+boolean dbg_testkeyin=0,dbg_testcontrolnoisy=0,dbg_nointest=0;\r
+#endif\r
+#ifdef __DEBUG_MAP__\r
+boolean dbg_maptext=0;\r
+byte *dbg_mapdata;\r
+#endif\r
+#endif //debug\r
+\r
+#ifdef __WATCOMC__\r
+// TODO: Could we also provide a build mode to emit debug to the "Bochs E9 hack?"\r
+#ifdef DEBUGSERIAL\r
+# include <stdarg.h>\r
+# include <stdlib.h>\r
+# include <stdio.h>\r
+\r
+unsigned char _DEBUG_INITed = 0;\r
+struct info_8250 *_DEBUG_uart = NULL;\r
+\r
+int _DEBUG_INIT() {\r
+ if (!_DEBUG_INITed) {\r
+ unsigned int i;\r
+ uint16_t port;\r
+\r
+ if (!init_8250()) return 0;\r
+\r
+ // what does the BIOS say the serial ports are?\r
+ probe_8250_bios_ports();\r
+ for (i=0;i < bios_8250_ports;i++) {\r
+ port = get_8250_bios_port(i);\r
+ if (port == 0) continue;\r
+ probe_8250(port);\r
+ }\r
+\r
+ // what about the standard serial ports?\r
+ for (i=0;i < (sizeof(standard_8250_ports)/sizeof(standard_8250_ports[0]));i++) {\r
+ port = standard_8250_ports[i];\r
+ if (port == 0) continue;\r
+ probe_8250(port);\r
+ }\r
+\r
+ // pick the first port, which is probably COM1\r
+ if (base_8250_ports == 0) return 0; // FIXME: You know "base_8250_ports" is probably a bad variable name for the max entries in info_8250_port[]\r
+ _DEBUG_uart = &info_8250_port[0];\r
+ _DEBUG_INITed = 1;\r
+\r
+ // init the COM port.\r
+ // in DOSBox-X, the "log" mode will receive our text and print it into the log file\r
+ // on real hardware, our text will likely go over a null modem cable to another PC running a serial terminal program like PuTTY or minicom.\r
+ // if nothing is connected, then the bytes go off into the ether to get lost and life goes on.\r
+ uart_8250_enable_interrupt(_DEBUG_uart,0); // disable interrupts\r
+ uart_8250_set_FIFO(_DEBUG_uart,0x07); // enable FIFO (why not?), also clear xmit/recv FIFO buffers, set threshhold to 1 byte\r
+ uart_8250_set_MCR(_DEBUG_uart,3); // RTS and DTS on\r
+ uart_8250_set_line_control(_DEBUG_uart,UART_8250_LCR_8BIT | UART_8250_LCR_PARITY); // 8 bit 1 stop bit odd parity\r
+ uart_8250_set_baudrate(_DEBUG_uart,uart_8250_baud_to_divisor(_DEBUG_uart,9600)); // 9600 baud\r
+ }\r
+\r
+ return _DEBUG_INITed;\r
+}\r
+\r
+void _DEBUG(const char *msg) {\r
+ if (_DEBUG_uart != NULL) {\r
+ char c;\r
+\r
+ while ((c=(*msg++)) != 0/*NUL*/) {\r
+ while (!uart_8250_can_write(_DEBUG_uart)); // wait for the UART to indicate readiness for our output\r
+ uart_8250_write(_DEBUG_uart,(uint8_t)c); // then write it\r
+ }\r
+ }\r
+}\r
+\r
+static char _DEBUGF_TMP[256];\r
+\r
+void _DEBUGF(const char *fmt,...) {\r
+ va_list va;\r
+\r
+ va_start(va,fmt);\r
+ vsnprintf(_DEBUGF_TMP,sizeof(_DEBUGF_TMP),fmt,va);\r
+ _DEBUG(_DEBUGF_TMP);\r
+ va_end(va);\r
+}\r
+#endif //serial\r
+#endif //watcomc\r
+/*\r
+================\r
+=\r
+= ShapeTest\r
+=\r
+================\r
+*/\r
+\r
+#pragma warn -pia\r
+void ShapeTest (global_game_variables_t *gvar)\r
+{\r
+extern word NumDigi;\r
+extern word _seg *DigiList;\r
+static char buf[10];\r
+\r
+ boolean done;\r
+ ScanCode scan;\r
+ int i,j;\r
+// dword l; word k,x;\r
+ memptr addr;\r
+ PageListStruct far *page;\r
+\r
+// CenterWindow(20,16);\r
+// VW_UpdateScreen();\r
+ for (i = 0,done = false;!done;)\r
+ {\r
+// US_ClearWindow();\r
+// sound = -1;\r
+\r
+ page = &(gvar->pm.PMPages[i]);\r
+// US_Print(" Page #");\r
+// US_PrintUnsigned(i);\r
+ printf(" Page #%u", i);\r
+ if (i < (gvar->pm.fi.PMSpriteStart))\r
+// US_Print(" (Wall)");\r
+ printf(" (Wall)");\r
+/* else if (i < (gvar->pm.fi.PMSoundStart))\r
+// US_Print(" (Sprite)");\r
+ printf(" (Sprite)");\r
+ else if (i == (gvar->pm.fi.ChunksInFile - 1))\r
+// US_Print(" (Sound Info)");\r
+ printf(" (Sound Info)");\r
+ else\r
+// US_Print(" (Sound)");\r
+ printf(" (Sound)");*/\r
+\r
+// US_Print("\n XMS: ");\r
+ printf("\n XMS: ");\r
+ if (page->xmsPage != -1)\r
+// US_PrintUnsigned(page->xmsPage);\r
+ printf("%u", page->xmsPage);\r
+ else\r
+// US_Print("No");\r
+ printf("No");\r
+\r
+// US_Print("\n Main: ");\r
+ if (page->mainPage != -1)\r
+// US_PrintUnsigned(page->mainPage);\r
+ printf("\n Main: %u", page->mainPage);\r
+ else if (page->emsPage != -1)\r
+ {\r
+// US_Print("EMS ");\r
+// US_PrintUnsigned(page->emsPage);\r
+ printf("EMS %u", page->emsPage);\r
+ }\r
+ else\r
+// US_Print("No");\r
+ printf("No");\r
+\r
+// US_Print("\n Last hit: ");\r
+// US_PrintUnsigned(page->lastHit);\r
+ printf("\n Last hit: %u", page->lastHit);\r
+\r
+// US_Print("\n Address: ");\r
+ printf("\n Address: ");\r
+ addr = PM_GetPageAddress(i, gvar);\r
+ sprintf(buf,"0x%04x",(word)addr);\r
+// US_Print(buf);\r
+ printf("%s", buf);\r
+\r
+ if (addr)\r
+ {\r
+/* if (i < PMSpriteStart)\r
+ {\r
+ //\r
+ // draw the wall\r
+ //\r
+ bufferofs += 32*SCREENWIDTH;\r
+ postx = 128;\r
+ postwidth = 1;\r
+ postsource = ((long)((unsigned)addr))<<16;\r
+ for (x=0;x<64;x++,postx++,postsource+=64)\r
+ {\r
+ wallheight[postx] = 256;\r
+ FarScalePost ();\r
+ }\r
+ bufferofs -= 32*SCREENWIDTH;\r
+ }\r
+ else if (i < PMSoundStart)\r
+ {\r
+ //\r
+ // draw the sprite\r
+ //\r
+ bufferofs += 32*SCREENWIDTH;\r
+ SimpleScaleShape (160, i-PMSpriteStart, 64);\r
+ bufferofs -= 32*SCREENWIDTH;\r
+ }\r
+ else if (i == ChunksInFile - 1)\r
+ {\r
+ US_Print("\n\n Number of sounds: ");\r
+ US_PrintUnsigned(NumDigi);\r
+ for (l = j = k = 0;j < NumDigi;j++)\r
+ {\r
+ l += DigiList[(j * 2) + 1];\r
+ k += (DigiList[(j * 2) + 1] + (PMPageSize - 1)) / PMPageSize;\r
+ }\r
+ US_Print("\n Total bytes: ");\r
+ US_PrintUnsigned(l);\r
+ US_Print("\n Total pages: ");\r
+ US_PrintUnsigned(k);\r
+ }\r
+ else\r
+ {\r
+ byte far *dp = (byte far *)MK_FP(addr,0);\r
+ for (j = 0;j < NumDigi;j++)\r
+ {\r
+ k = (DigiList[(j * 2) + 1] + (PMPageSize - 1)) / PMPageSize;\r
+ if\r
+ (\r
+ (i >= PMSoundStart + DigiList[j * 2])\r
+ && (i < PMSoundStart + DigiList[j * 2] + k)\r
+ )\r
+ break;\r
+ }\r
+ if (j < NumDigi)\r
+ {\r
+// sound = j;\r
+ US_Print("\n Sound #");\r
+ US_PrintUnsigned(j);\r
+ US_Print("\n Segment #");\r
+ US_PrintUnsigned(i - PMSoundStart - DigiList[j * 2]);\r
+ }\r
+ for (j = 0;j < page->length;j += 32)\r
+ {\r
+ byte v = dp[j];\r
+ int v2 = (unsigned)v;\r
+ v2 -= 128;\r
+ v2 /= 4;\r
+ if (v2 < 0)\r
+ VWB_Vlin(WindowY + WindowH - 32 + v2,\r
+ WindowY + WindowH - 32,\r
+ WindowX + 8 + (j / 32),BLACK);\r
+ else\r
+ VWB_Vlin(WindowY + WindowH - 32,\r
+ WindowY + WindowH - 32 + v2,\r
+ WindowX + 8 + (j / 32),BLACK);\r
+ }\r
+ }*/\r
+ printf("\naddr ok\n");\r
+ }\r
+\r
+// VW_UpdateScreen();\r
+\r
+// while (!(scan = IN_GetLastScan()))\r
+ scan = *IN_GetScanName(scan);\r
+// SD_Poll();\r
+\r
+ IN_ClearKey(scan);\r
+ switch (scan)\r
+ {\r
+ case sc_LeftArrow:\r
+ if (i)\r
+ i--;\r
+ break;\r
+ case sc_RightArrow:\r
+ if (++i >= (gvar->pm.fi.ChunksInFile))\r
+ i--;\r
+ break;\r
+ case sc_W: // Walls\r
+ i = 0;\r
+ break;\r
+ case sc_S: // Sprites\r
+// i = (gvar->pm.fi.PMSpriteStart);\r
+ break;\r
+ case sc_D: // Digitized\r
+// i = (gvar->pm.fi.PMSoundStart);\r
+ break;\r
+ case sc_I: // Digitized info\r
+ i = (gvar->pm.fi.ChunksInFile - 1);\r
+ break;\r
+ case sc_L: // Load all pages\r
+ for (j = 0;j < (gvar->pm.fi.ChunksInFile);j++)\r
+ PM_GetPage(j, gvar);\r
+ break;\r
+ case sc_P:\r
+// if (sound != -1)\r
+// SD_PlayDigitized(sound);\r
+ break;\r
+ case sc_Escape:\r
+ done = true;\r
+ break;\r
+ case sc_Enter:\r
+ PM_GetPage(i, gvar);\r
+ break;\r
+ }\r
+ }\r
+ //SD_StopDigitized();\r
+}\r
+#pragma warn +pia\r