X-Git-Url: http://4ch.mooo.com/gitweb/?a=blobdiff_plain;f=16%2Fmodex16%2Fmodex16.c;h=f01116b5257fbab4c24267157af17adc0b73ff20;hb=b8c9d5fcb2b66420bc673f54b14cc5d0ea5283ed;hp=47a596873b1e0a2ebd4ef1bb5024e5dff76b55dd;hpb=3686f3bf9c15445091aef92692ccf3486389efbc;p=16.git

diff --git a/16/modex16/modex16.c b/16/modex16/modex16.c
old mode 100644
new mode 100755
index 47a59687..f01116b5
--- a/16/modex16/modex16.c
+++ b/16/modex16/modex16.c
@@ -2,11 +2,16 @@
 #include <string.h>
 #include <mem.h>
 #include <conio.h>
+#include <stdio.h>
+#include <stdlib.h>
 #include "modex16.h"
 
 
 byte far* VGA=(byte far*) 0xA0000000; 	/* this points to video memory. */
 
+static void fadePalette(sbyte fade, sbyte start, word iter, byte *palette);
+static byte tmppal[PAL_SIZE];
+
 static void
 vgaSetMode(byte mode)
 {
@@ -76,28 +81,75 @@ modexLeave() {
 }
 
 
+page_t
+modexDefaultPage() {
+    page_t page;
+
+    /* default page values */
+    page.data = VGA;
+    page.dx = 0;
+    page.dy = 0;
+    page.width = SCREEN_WIDTH;
+    page.height = SCREEN_HEIGHT;
+
+    return page;
+}
+
+/* returns the next page in contiguous memory
+ * the next page will be the same size as p, by default
+ */
+page_t
+modexNextPage(page_t *p) {
+    page_t result;
+
+    result.data = p->data + (p->width/4)*p->height;  /* compute the offset */
+    result.dx = 0;
+    result.dy = 0;
+    result.width = p->width;
+    result.height = p->height;
+
+    return result;
+}
+
+
 void
-modexShowPage(page_t page) {
+modexShowPage(page_t *page) {
     word high_address;
     word low_address;
+    word offset;
+    byte crtcOffset;
 
-    high_address = HIGH_ADDRESS | ((word)(page) & 0xff00);
-    low_address  = LOW_ADDRESS  | ((word)(page) << 8);
+    /* calculate offset */
+    offset = (word) page->data;
+    offset += page->dy * (page->width >> 2 );
+    offset += page->dx >> 2;
 
-    /* wait for appropriate timing */
+    /* calculate crtcOffset according to virtual width */
+    crtcOffset = page->width >> 3;
+
+    high_address = HIGH_ADDRESS | (offset & 0xff00);
+    low_address  = LOW_ADDRESS  | (offset << 8);
+
+    /* wait for appropriate timing and then program CRTC */
     while ((inp(INPUT_STATUS_1) & DISPLAY_ENABLE));
     outpw(CRTC_INDEX, high_address);
     outpw(CRTC_INDEX, low_address);
+    outp(CRTC_INDEX, 0x13);
+    outp(CRTC_DATA, crtcOffset);
 
     /*  wait for one retrace */
     while (!(inp(INPUT_STATUS_1) & VRETRACE)); 
+
+    /* do PEL panning here */
+    outp(AC_INDEX, 0x33);
+    outp(AC_INDEX, (page->dx & 0x03) << 1);
 }
 
 
 void
 modexPanPage(page_t *page, int dx, int dy) {
-    /* TODO figure out how the $@#! you do horizontal panning */
-    *page += dy * SCREEN_WIDTH;
+    page->dx = dx;
+    page->dy = dy;
 }
 
 
@@ -109,19 +161,445 @@ modexSelectPlane(byte plane) {
 
 
 void
-modexClearRegion(page_t page, int x, int y, int w, int h, byte color) {
-    byte plane;
-    word endx = x + w;
-    word endy = y + h;
-    word dx, dy;
+modexClearRegion(page_t *page, int x, int y, int w, int h, byte  color) {
+    word pageOff = (word) page->data;
+    word xoff=x/4;       /* xoffset that begins each row */
+    word scanCount=w/4;  /* number of iterations per row (excluding right clip)*/
+    word poffset = pageOff + y*(page->width/4) + xoff; /* starting offset */
+    word nextRow = page->width/4-scanCount-1;  /* loc of next row */
+    byte lclip[] = {0x0f, 0x0e, 0x0c, 0x08};  /* clips for rectangles not on 4s */
+    byte rclip[] = {0x00, 0x01, 0x03, 0x07};
+    byte left = lclip[x&0x03];
+    byte right = rclip[(x+w)&0x03];
+
+    /* handle the case which requires an extra group */
+    if((x & 0x03) && !((x+w) & 0x03)) {
+      right=0x0f;
+    }
+
+    __asm {
+		MOV AX, SCREEN_SEG      ; go to the VGA memory
+		MOV ES, AX
+		MOV DI, poffset		; go to the first pixel
+		MOV DX, SC_INDEX	; point to the map mask
+		MOV AL, MAP_MASK
+		OUT DX, AL
+		INC DX
+		MOV AL, color		; get ready to write colors
+	SCAN_START:
+		MOV CX, scanCount	; count the line
+		MOV BL, AL		; remember color
+		MOV AL, left		; do the left clip
+		OUT DX, AL		; set the left clip
+		MOV AL, BL		; restore color
+		STOSB			; write the color
+		DEC CX
+		JZ SCAN_DONE		; handle 1 group stuff
+
+		;-- write the main body of the scanline
+		MOV BL, AL	  	; remember color
+		MOV AL, 0x0f		; write to all pixels
+		OUT DX, AL
+		MOV AL, BL		; restore color
+		REP STOSB		; write the color
+	SCAN_DONE:
+		MOV BL, AL		; remeber color
+		MOV AL, right
+		OUT DX, AL		; do the right clip
+		MOV AL, BL		; restore color
+		STOSB			; write pixel
+		ADD DI, nextRow		; go to the next row
+		DEC h
+		JNZ SCAN_START
+    }
+}
+
+
+void
+modexDrawBmp(page_t *page, int x, int y, bitmap_t *bmp) {
+    /* draw the region (the entire freakin bitmap) */
+    modexDrawBmpRegion(page, x, y, 0, 0, bmp->width, bmp->height, bmp);
+}
+
+
+void
+modexDrawBmpRegion(page_t *page, int x, int y,
+                   int rx, int ry, int rw, int rh, bitmap_t *bmp) {
+    word poffset = (word) page->data  + y*(page->width/4) + x/4;
+    byte *data = bmp->data;
+    word bmpOffset = (word) data + ry * bmp->width + rx;
+    word width = rw;
+    word height = rh;
+    byte plane = 1 << ((byte) x & 0x03);
+    word scanCount = width/4 + (width%4 ? 1 :0);
+    word nextPageRow = page->width/4 - scanCount;
+    word nextBmpRow = (word) bmp->width - width;
+    word rowCounter;
+    byte planeCounter = 4;
+
+    __asm {
+		MOV AX, SCREEN_SEG      ; go to the VGA memory
+		MOV ES, AX
+
+		MOV DX, SC_INDEX	; point at the map mask register
+		MOV AL, MAP_MASK	;
+		OUT DX, AL		;
+
+	PLANE_LOOP:
+		MOV DX, SC_DATA		; select the current plane
+		MOV AL, plane		;
+		OUT DX, AL		;
+
+		;-- begin plane painting
+		MOV AX, height		; start the row counter
+		MOV rowCounter, AX	; 
+		MOV DI, poffset		; go to the first pixel
+		MOV SI, bmpOffset	; go to the bmp pixel
+	ROW_LOOP:
+		MOV CX, width		; count the columns
+	SCAN_LOOP:
+		MOVSB			; copy the pixel
+		SUB CX, 3		; we skip the next 3
+		ADD SI, 3		; skip the bmp pixels
+		LOOP SCAN_LOOP		; finish the scan
+
+		MOV AX, nextPageRow
+		ADD DI, AX		; go to the next row on screen
+		MOV AX, nextBmpRow
+		ADD SI, AX		; go to the next row on bmp
+
+		DEC rowCounter
+		JNZ ROW_LOOP		; do all the rows
+		;-- end plane painting
+
+		MOV AL, plane		; advance to the next plane
+		SHL AL, 1		;
+		AND AL, 0x0f		; mask the plane properly
+		MOV plane, AL		; store the plane
+
+		INC bmpOffset		; start bmp at the right spot
+
+		DEC planeCounter
+		JNZ PLANE_LOOP		; do all 4 planes
+    }
+}
 
-    /* TODO Make this fast.  It's SLOOOOOOW */
-    for(plane=0; plane < 4; plane++) {
-	modexSelectPlane(PLANE(plane+x));
-	for(dx = x; dx < endx; dx+=4) {
-	    for(dy=y; dy<endy; dy++) {
-		page[PAGE_OFFSET(dx, dy)] = color;
+
+void
+modexDrawSprite(page_t *page, int x, int y, bitmap_t *bmp) {
+    /* draw the whole sprite */
+    modexDrawSpriteRegion(page, x, y, 0, 0, bmp->width, bmp->height, bmp);
+}
+
+void
+modexDrawSpriteRegion(page_t *page, int x, int y,
+		      int rx, int ry, int rw, int rh, bitmap_t *bmp) {
+    word poffset = (word)page->data + y*(page->width/4) + x/4;
+    byte *data = bmp->data;
+    word bmpOffset = (word) data + ry * bmp->width + rx;
+    word width = rw;
+    word height = rh;
+    byte plane = 1 << ((byte) x & 0x03);
+    word scanCount = width/4 + (width%4 ? 1 :0);
+    word nextPageRow = page->width/4 - scanCount;
+    word nextBmpRow = (word) bmp->width - width;
+    word rowCounter;
+    byte planeCounter = 4;
+
+    __asm {
+		MOV AX, SCREEN_SEG      ; go to the VGA memory
+		MOV ES, AX
+
+		MOV DX, SC_INDEX	; point at the map mask register
+		MOV AL, MAP_MASK	;
+		OUT DX, AL		;
+
+	PLANE_LOOP:
+		MOV DX, SC_DATA		; select the current plane
+		MOV AL, plane		;
+		OUT DX, AL		;
+
+		;-- begin plane painting
+		MOV AX, height		; start the row counter
+		MOV rowCounter, AX	; 
+		MOV DI, poffset		; go to the first pixel
+		MOV SI, bmpOffset	; go to the bmp pixel
+	ROW_LOOP:
+		MOV CX, width		; count the columns
+	SCAN_LOOP:
+		LODSB
+		DEC SI
+		CMP AL, 0
+		JNE DRAW_PIXEL		; draw non-zero pixels
+
+		INC DI			; skip the transparent pixel
+		ADD SI, 1
+		JMP NEXT_PIXEL
+	DRAW_PIXEL:
+		MOVSB			; copy the pixel
+	NEXT_PIXEL:
+		SUB CX, 3		; we skip the next 3
+		ADD SI, 3		; skip the bmp pixels
+		LOOP SCAN_LOOP		; finish the scan
+
+		MOV AX, nextPageRow
+		ADD DI, AX		; go to the next row on screen
+		MOV AX, nextBmpRow
+		ADD SI, AX		; go to the next row on bmp
+
+		DEC rowCounter
+		JNZ ROW_LOOP		; do all the rows
+		;-- end plane painting
+
+		MOV AL, plane		; advance to the next plane
+		SHL AL, 1		;
+		AND AL, 0x0f		; mask the plane properly
+		MOV plane, AL		; store the plane
+
+		INC bmpOffset		; start bmp at the right spot
+
+		DEC planeCounter
+		JNZ PLANE_LOOP		; do all 4 planes
+    }
+}
+
+
+/* copy a region of video memory from one page to another.
+ * It assumes that the left edge of the tile is the same on both
+ * regions and the memory areas do not overlap.
+ */
+void
+modexCopyPageRegion(page_t *dest, page_t *src,
+		    word sx, word sy,
+		    word dx, word dy,
+		    word width, word height)
+{
+    word doffset = (word)dest->data + dy*(dest->width/4) + dx/4;
+    word soffset = (word)src->data + sy*(src->width/4) + sx/4;
+    word scans   = width/4;
+    word nextSrcRow = src->width/4 - scans - 1;
+    word nextDestRow = dest->width/4 - scans - 1;
+    byte lclip[] = {0x0f, 0x0e, 0x0c, 0x08};  /* clips for rectangles not on 4s */
+    byte rclip[] = {0x0f, 0x01, 0x03, 0x07};
+    byte left = lclip[sx&0x03];
+    byte right = rclip[(sx+width)&0x03];
+
+    __asm {
+		MOV AX, SCREEN_SEG	; work in the vga space
+		MOV ES, AX		;
+		MOV DI, doffset		;
+		MOV SI, soffset		;
+
+		MOV DX, GC_INDEX	; turn off cpu bits
+		MOV AX, 0008h		;
+		OUT DX, AX
+
+		MOV AX, SC_INDEX	; point to the mask register
+		MOV DX, AX		;
+		MOV AL, MAP_MASK	;
+		OUT DX, AL		;
+		INC DX			;
+
+	ROW_START:
+		PUSH DS
+		MOV AX, ES
+		MOV DS, AX
+		MOV CX, scans		; the number of latches
+
+		MOV AL, left		; do the left column
+		OUT DX, AL		;
+		MOVSB			;
+		DEC CX			;
+
+		MOV AL, 0fh		; do the inner columns
+		OUT DX, AL
+		REP MOVSB		; copy the pixels
+
+		MOV AL, right		; do the right column
+		OUT DX, AL
+		MOVSB
+		POP DS
+
+		MOV AX, SI		; go the start of the next row
+		ADD AX, nextSrcRow	;
+		MOV SI, AX		;
+		MOV AX, DI		;
+		ADD AX, nextDestRow	;
+		MOV DI, AX		;
+
+		DEC height		; do the rest of the actions
+		JNZ ROW_START		;
+
+		MOV DX, GC_INDEX+1	; go back to CPU data
+		MOV AL, 0ffh		; none from latches
+		OUT DX, AL		;
+    }
+}
+
+
+/* fade and flash */
+void
+modexFadeOn(word fade, byte *palette) {
+    fadePalette(-fade, 64, 64/fade+1, palette);
+}
+
+
+void
+modexFadeOff(word fade, byte *palette) {
+    fadePalette(fade, 0, 64/fade+1, palette);
+}
+
+
+void
+modexFlashOn(word fade, byte *palette) {
+    fadePalette(fade, -64, 64/fade+1, palette);
+}
+
+
+void
+modexFlashOff(word fade, byte *palette) {
+    fadePalette(-fade, 0, 64/fade+1, palette);
+}
+
+
+static void
+fadePalette(sbyte fade, sbyte start, word iter, byte *palette) {
+    word i;
+    byte dim = start;
+
+    /* handle the case where we just update */
+    if(iter == 0) {
+	modexPalUpdate(palette);
+	return;
+    }
+
+    while(iter > 0) {  /* FadeLoop */
+	for(i=0; i<PAL_SIZE; i++) { /* loadpal_loop */
+	    tmppal[i] = palette[i] - dim;
+	    if(tmppal[i] > 127) {
+		tmppal[i] = 0;
+	    } else if(tmppal[i] > 63) {
+		tmppal[i] = 63;
 	    }
 	}
+        modexPalUpdate(tmppal);
+	iter--;
+	dim += fade;
+    }
+}
+
+
+/* save and load */
+void
+modexPalSave(byte *palette) {
+    int  i;
+
+    outp(PAL_READ_REG, 0);	/* start at palette entry 0 */
+    for(i=0; i<PAL_SIZE; i++) {
+	palette[i] = inp(PAL_DATA_REG); /* read the palette data */
+    }
+}
+
+
+byte *
+modexNewPal() {
+    byte *ptr;
+    ptr = malloc(PAL_SIZE);
+
+    /* handle errors */
+    if(!ptr) {
+	printf("Could not allocate palette.\n");
+	exit(-1);
+    }
+
+    return ptr;
+}
+
+
+void
+modexLoadPalFile(byte *filename, byte **palette) {
+    FILE *file;
+    byte *ptr;
+
+    /* free the palette if it exists */
+    if(*palette) {
+	free(*palette);
+    }
+
+    /* allocate the new palette */
+    *palette = modexNewPal();
+
+    /* open the file */
+    file = fopen(filename, "rb");
+    if(!file) {
+	printf("Could not open palette file: %s\n", filename);
+	exit(-2);
+    }
+
+    /* read the file */
+    ptr = *palette;
+    while(!feof(file)) {
+	*ptr++ = fgetc(file);
+    }
+
+    fclose(file);
+}
+
+
+void
+modexSavePalFile(char *filename, byte *pal) {
+    unsigned int i;
+    FILE *file;
+
+    /* open the file for writing */
+    file = fopen(filename, "wb");
+    if(!file) {
+	printf("Could not open %s for writing\n", filename);
+	exit(-2);
+    }
+
+    /* write the data to the file */
+    fwrite(pal, 1, PAL_SIZE, file);
+    fclose(file);
+}
+
+
+/* blanking */
+void
+modexPalBlack() {
+    fadePalette(-1, 64, 1, tmppal);
+}
+
+
+void
+modexPalWhite() {
+    fadePalette(-1, -64, 1, tmppal);
+}
+
+
+/* utility */
+void
+modexPalUpdate(byte *p) {
+    int i;
+    modexWaitBorder();
+    outp(PAL_WRITE_REG, 0);  /* start at the beginning of palette */
+    for(i=0; i<PAL_SIZE/2; i++) {
+	outp(PAL_DATA_REG, p[i]);
+    }
+    modexWaitBorder();	    /* waits one retrace -- less flicker */
+    for(i=PAL_SIZE/2; i<PAL_SIZE; i++) {
+	outp(PAL_DATA_REG, p[i]);
+    }
+}
+
+
+void
+modexWaitBorder() {
+    while(inp(INPUT_STATUS_1)  & 8)  {
+	/* spin */
+    }
+
+    while(!(inp(INPUT_STATUS_1)  & 8))  {
+	/* spin */
     }
 }