2 * libmad - MPEG audio decoder library
3 * Copyright (C) 2000-2004 Underbit Technologies, Inc.
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; either version 2 of the License, or
8 * (at your option) any later version.
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
19 * $Id: fixed.h,v 1.38 2004/02/17 02:02:03 rob Exp $
22 # ifndef LIBMAD_FIXED_H
23 # define LIBMAD_FIXED_H
26 typedef signed int mad_fixed_t;
28 typedef signed int mad_fixed64hi_t;
29 typedef unsigned int mad_fixed64lo_t;
31 typedef signed long mad_fixed_t;
33 typedef signed long mad_fixed64hi_t;
34 typedef unsigned long mad_fixed64lo_t;
37 # if defined(_MSC_VER)
38 # define mad_fixed64_t signed __int64
39 # elif 1 || defined(__GNUC__)
40 # define mad_fixed64_t signed long long
43 # if defined(FPM_FLOAT)
44 typedef double mad_sample_t;
46 typedef mad_fixed_t mad_sample_t;
50 * Fixed-point format: 0xABBBBBBB
51 * A == whole part (sign + 3 bits)
52 * B == fractional part (28 bits)
54 * Values are signed two's complement, so the effective range is:
55 * 0x80000000 to 0x7fffffff
56 * -8.0 to +7.9999999962747097015380859375
58 * The smallest representable value is:
59 * 0x00000001 == 0.0000000037252902984619140625 (i.e. about 3.725e-9)
61 * 28 bits of fractional accuracy represent about
62 * 8.6 digits of decimal accuracy.
64 * Fixed-point numbers can be added or subtracted as normal
65 * integers, but multiplication requires shifting the 64-bit result
66 * from 56 fractional bits back to 28 (and rounding.)
68 * Changing the definition of MAD_F_FRACBITS is only partially
69 * supported, and must be done with care.
72 # define MAD_F_FRACBITS 28
74 # if MAD_F_FRACBITS == 28
75 # define MAD_F(x) ((mad_fixed_t) (x##L))
77 # if MAD_F_FRACBITS < 28
78 # warning "MAD_F_FRACBITS < 28"
79 # define MAD_F(x) ((mad_fixed_t) \
81 (1L << (28 - MAD_F_FRACBITS - 1))) >> \
82 (28 - MAD_F_FRACBITS)))
83 # elif MAD_F_FRACBITS > 28
84 # error "MAD_F_FRACBITS > 28 not currently supported"
85 # define MAD_F(x) ((mad_fixed_t) \
86 ((x##L) << (MAD_F_FRACBITS - 28)))
90 # define MAD_F_MIN ((mad_fixed_t) -0x80000000L)
91 # define MAD_F_MAX ((mad_fixed_t) +0x7fffffffL)
93 # define MAD_F_ONE MAD_F(0x10000000)
95 # define mad_f_tofixed(x) ((mad_fixed_t) \
96 ((x) * (double) (1L << MAD_F_FRACBITS) + 0.5))
97 # define mad_f_todouble(x) ((double) \
98 ((x) / (double) (1L << MAD_F_FRACBITS)))
100 # define mad_f_intpart(x) ((x) >> MAD_F_FRACBITS)
101 # define mad_f_fracpart(x) ((x) & ((1L << MAD_F_FRACBITS) - 1))
102 /* (x should be positive) */
104 # define mad_f_fromint(x) ((x) << MAD_F_FRACBITS)
106 # define mad_f_add(x, y) ((x) + (y))
107 # define mad_f_sub(x, y) ((x) - (y))
109 # if defined(FPM_FLOAT)
110 # error "FPM_FLOAT not yet supported"
113 # define MAD_F(x) mad_f_todouble(x)
115 # define mad_f_mul(x, y) ((x) * (y))
116 # define mad_f_scale64
118 # undef ASO_ZEROCHECK
120 # elif defined(FPM_64BIT)
123 * This version should be the most accurate if 64-bit types are supported by
124 * the compiler, although it may not be the most efficient.
126 # if defined(OPT_ACCURACY)
127 # define mad_f_mul(x, y) \
129 ((((mad_fixed64_t) (x) * (y)) + \
130 (1L << (MAD_F_SCALEBITS - 1))) >> MAD_F_SCALEBITS))
132 # define mad_f_mul(x, y) \
133 ((mad_fixed_t) (((mad_fixed64_t) (x) * (y)) >> MAD_F_SCALEBITS))
136 # define MAD_F_SCALEBITS MAD_F_FRACBITS
138 /* --- Intel --------------------------------------------------------------- */
140 # elif defined(FPM_INTEL)
142 # if defined(_MSC_VER)
143 # pragma warning(push)
144 # pragma warning(disable: 4035) /* no return value */
146 mad_fixed_t mad_f_mul_inline(mad_fixed_t x, mad_fixed_t y)
149 fracbits = MAD_F_FRACBITS
155 shrd eax, edx, fracbits
158 /* implicit return of eax */
160 # pragma warning(pop)
162 # define mad_f_mul mad_f_mul_inline
163 # define mad_f_scale64
166 * This Intel version is fast and accurate; the disposition of the least
167 * significant bit depends on OPT_ACCURACY via mad_f_scale64().
169 # define MAD_F_MLX(hi, lo, x, y) \
171 : "=a" (lo), "=d" (hi) \
172 : "%a" (x), "rm" (y) \
175 # if defined(OPT_ACCURACY)
177 * This gives best accuracy but is not very fast.
179 # define MAD_F_MLA(hi, lo, x, y) \
180 ({ mad_fixed64hi_t __hi; \
181 mad_fixed64lo_t __lo; \
182 MAD_F_MLX(__hi, __lo, (x), (y)); \
183 asm ("addl %2,%0\n\t" \
185 : "=rm" (lo), "=rm" (hi) \
186 : "r" (__lo), "r" (__hi), "0" (lo), "1" (hi) \
189 # endif /* OPT_ACCURACY */
191 # if defined(OPT_ACCURACY)
193 * Surprisingly, this is faster than SHRD followed by ADC.
195 # define mad_f_scale64(hi, lo) \
196 ({ mad_fixed64hi_t __hi_; \
197 mad_fixed64lo_t __lo_; \
198 mad_fixed_t __result; \
199 asm ("addl %4,%2\n\t" \
201 : "=rm" (__lo_), "=rm" (__hi_) \
202 : "0" (lo), "1" (hi), \
203 "ir" (1L << (MAD_F_SCALEBITS - 1)), "ir" (0) \
205 asm ("shrdl %3,%2,%1" \
207 : "0" (__lo_), "r" (__hi_), "I" (MAD_F_SCALEBITS) \
211 # elif defined(OPT_INTEL)
213 * Alternate Intel scaling that may or may not perform better.
215 # define mad_f_scale64(hi, lo) \
216 ({ mad_fixed_t __result; \
217 asm ("shrl %3,%1\n\t" \
221 : "0" (lo), "r" (hi), \
222 "I" (MAD_F_SCALEBITS), "I" (32 - MAD_F_SCALEBITS) \
227 # define mad_f_scale64(hi, lo) \
228 ({ mad_fixed_t __result; \
229 asm ("shrdl %3,%2,%1" \
231 : "0" (lo), "r" (hi), "I" (MAD_F_SCALEBITS) \
235 # endif /* OPT_ACCURACY */
237 # define MAD_F_SCALEBITS MAD_F_FRACBITS
240 /* --- ARM ----------------------------------------------------------------- */
242 # elif defined(FPM_ARM)
245 * This ARM V4 version is as accurate as FPM_64BIT but much faster. The
246 * least significant bit is properly rounded at no CPU cycle cost!
250 * This is faster than the default implementation via MAD_F_MLX() and
253 # define mad_f_mul(x, y) \
254 ({ mad_fixed64hi_t __hi; \
255 mad_fixed64lo_t __lo; \
256 mad_fixed_t __result; \
257 asm ("smull %0, %1, %3, %4\n\t" \
258 "movs %0, %0, lsr %5\n\t" \
259 "adc %2, %0, %1, lsl %6" \
260 : "=&r" (__lo), "=&r" (__hi), "=r" (__result) \
261 : "%r" (x), "r" (y), \
262 "M" (MAD_F_SCALEBITS), "M" (32 - MAD_F_SCALEBITS) \
268 # define MAD_F_MLX(hi, lo, x, y) \
269 asm ("smull %0, %1, %2, %3" \
270 : "=&r" (lo), "=&r" (hi) \
273 # define MAD_F_MLA(hi, lo, x, y) \
274 asm ("smlal %0, %1, %2, %3" \
275 : "+r" (lo), "+r" (hi) \
278 # define MAD_F_MLN(hi, lo) \
279 asm ("rsbs %0, %2, #0\n\t" \
281 : "=r" (lo), "=r" (hi) \
282 : "0" (lo), "1" (hi) \
285 # define mad_f_scale64(hi, lo) \
286 ({ mad_fixed_t __result; \
287 asm ("movs %0, %1, lsr %3\n\t" \
288 "adc %0, %0, %2, lsl %4" \
290 : "r" (lo), "r" (hi), \
291 "M" (MAD_F_SCALEBITS), "M" (32 - MAD_F_SCALEBITS) \
296 # define MAD_F_SCALEBITS MAD_F_FRACBITS
298 /* --- MIPS ---------------------------------------------------------------- */
300 # elif defined(FPM_MIPS)
303 * This MIPS version is fast and accurate; the disposition of the least
304 * significant bit depends on OPT_ACCURACY via mad_f_scale64().
306 # define MAD_F_MLX(hi, lo, x, y) \
308 : "=l" (lo), "=h" (hi) \
311 # if defined(HAVE_MADD_ASM)
312 # define MAD_F_MLA(hi, lo, x, y) \
314 : "+l" (lo), "+h" (hi) \
316 # elif defined(HAVE_MADD16_ASM)
318 * This loses significant accuracy due to the 16-bit integer limit in the
319 * multiply/accumulate instruction.
321 # define MAD_F_ML0(hi, lo, x, y) \
323 : "=l" (lo), "=h" (hi) \
324 : "%r" ((x) >> 12), "r" ((y) >> 16))
325 # define MAD_F_MLA(hi, lo, x, y) \
326 asm ("madd16 %2,%3" \
327 : "+l" (lo), "+h" (hi) \
328 : "%r" ((x) >> 12), "r" ((y) >> 16))
329 # define MAD_F_MLZ(hi, lo) ((mad_fixed_t) (lo))
332 # if defined(OPT_SPEED)
333 # define mad_f_scale64(hi, lo) \
334 ((mad_fixed_t) ((hi) << (32 - MAD_F_SCALEBITS)))
335 # define MAD_F_SCALEBITS MAD_F_FRACBITS
338 /* --- SPARC --------------------------------------------------------------- */
340 # elif defined(FPM_SPARC)
343 * This SPARC V8 version is fast and accurate; the disposition of the least
344 * significant bit depends on OPT_ACCURACY via mad_f_scale64().
346 # define MAD_F_MLX(hi, lo, x, y) \
347 asm ("smul %2, %3, %0\n\t" \
349 : "=r" (lo), "=r" (hi) \
350 : "%r" (x), "rI" (y))
352 /* --- PowerPC ------------------------------------------------------------- */
354 # elif defined(FPM_PPC)
357 * This PowerPC version is fast and accurate; the disposition of the least
358 * significant bit depends on OPT_ACCURACY via mad_f_scale64().
360 # define MAD_F_MLX(hi, lo, x, y) \
362 asm ("mullw %0,%1,%2" \
364 : "%r" (x), "r" (y)); \
365 asm ("mulhw %0,%1,%2" \
367 : "%r" (x), "r" (y)); \
371 # if defined(OPT_ACCURACY)
373 * This gives best accuracy but is not very fast.
375 # define MAD_F_MLA(hi, lo, x, y) \
376 ({ mad_fixed64hi_t __hi; \
377 mad_fixed64lo_t __lo; \
378 MAD_F_MLX(__hi, __lo, (x), (y)); \
379 asm ("addc %0,%2,%3\n\t" \
381 : "=r" (lo), "=r" (hi) \
382 : "%r" (lo), "r" (__lo), \
383 "%r" (hi), "r" (__hi) \
388 # if defined(OPT_ACCURACY)
390 * This is slower than the truncating version below it.
392 # define mad_f_scale64(hi, lo) \
393 ({ mad_fixed_t __result, __round; \
394 asm ("rotrwi %0,%1,%2" \
396 : "r" (lo), "i" (MAD_F_SCALEBITS)); \
397 asm ("extrwi %0,%1,1,0" \
400 asm ("insrwi %0,%1,%2,0" \
402 : "r" (hi), "i" (MAD_F_SCALEBITS)); \
403 asm ("add %0,%1,%2" \
405 : "%r" (__result), "r" (__round)); \
409 # define mad_f_scale64(hi, lo) \
410 ({ mad_fixed_t __result; \
411 asm ("rotrwi %0,%1,%2" \
413 : "r" (lo), "i" (MAD_F_SCALEBITS)); \
414 asm ("insrwi %0,%1,%2,0" \
416 : "r" (hi), "i" (MAD_F_SCALEBITS)); \
421 # define MAD_F_SCALEBITS MAD_F_FRACBITS
423 /* --- Default ------------------------------------------------------------- */
425 # elif defined(FPM_DEFAULT)
428 * This version is the most portable but it loses significant accuracy.
429 * Furthermore, accuracy is biased against the second argument, so care
430 * should be taken when ordering operands.
432 * The scale factors are constant as this is not used with SSO.
434 * Pre-rounding is required to stay within the limits of compliance.
436 # if defined(OPT_SPEED)
437 # define mad_f_mul(x, y) (((x) >> 12) * ((y) >> 16))
439 # define mad_f_mul(x, y) ((((x) + (1L << 11)) >> 12) * \
440 (((y) + (1L << 15)) >> 16))
443 /* ------------------------------------------------------------------------- */
446 # error "no FPM selected"
449 /* default implementations */
451 # if !defined(mad_f_mul)
452 # define mad_f_mul(x, y) \
453 ({ register mad_fixed64hi_t __hi; \
454 register mad_fixed64lo_t __lo; \
455 MAD_F_MLX(__hi, __lo, (x), (y)); \
456 mad_f_scale64(__hi, __lo); \
460 # if !defined(MAD_F_MLA)
461 # define MAD_F_ML0(hi, lo, x, y) ((lo) = mad_f_mul((x), (y)))
462 # define MAD_F_MLA(hi, lo, x, y) ((lo) += mad_f_mul((x), (y)))
463 # define MAD_F_MLN(hi, lo) ((lo) = -(lo))
464 # define MAD_F_MLZ(hi, lo) ((void) (hi), (mad_fixed_t) (lo))
467 # if !defined(MAD_F_ML0)
468 # define MAD_F_ML0(hi, lo, x, y) MAD_F_MLX((hi), (lo), (x), (y))
471 # if !defined(MAD_F_MLN)
472 # define MAD_F_MLN(hi, lo) ((hi) = ((lo) = -(lo)) ? ~(hi) : -(hi))
475 # if !defined(MAD_F_MLZ)
476 # define MAD_F_MLZ(hi, lo) mad_f_scale64((hi), (lo))
479 # if !defined(mad_f_scale64)
480 # if defined(OPT_ACCURACY)
481 # define mad_f_scale64(hi, lo) \
483 (((hi) << (32 - (MAD_F_SCALEBITS - 1))) | \
484 ((lo) >> (MAD_F_SCALEBITS - 1)))) + 1) >> 1)
486 # define mad_f_scale64(hi, lo) \
488 (((hi) << (32 - MAD_F_SCALEBITS)) | \
489 ((lo) >> MAD_F_SCALEBITS)))
491 # define MAD_F_SCALEBITS MAD_F_FRACBITS
496 mad_fixed_t mad_f_abs(mad_fixed_t);
497 mad_fixed_t mad_f_div(mad_fixed_t, mad_fixed_t);