-}
-
-
-void
-modexDrawBmp(page_t *page, int x, int y, bitmap_t *bmp) {
- /* draw the region (the entire freakin bitmap) */
- modexDrawBmpRegion(page, x, y, 0, 0, bmp->width, bmp->height, bmp);
-}
-
-
-void
-modexDrawBmpRegion(page_t *page, int x, int y,
- int rx, int ry, int rw, int rh, bitmap_t *bmp) {
- word poffset = (word) page->data + y*(page->width/4) + x/4;
- byte *data = bmp->data;//+bmp->offset;
- word bmpOffset = (word) data + ry * bmp->width + rx;
- word width = rw;
- word height = rh;
- byte plane = 1 << ((byte) x & 0x03);
- word scanCount = width/4 + (width%4 ? 1 :0);
- word nextPageRow = page->width/4 - scanCount;
- word nextBmpRow = (word) bmp->width - width;
- word rowCounter;
- byte planeCounter = 4;
-
- //code is a bit slow here
- __asm {
- MOV AX, SCREEN_SEG ; go to the VGA memory
- MOV ES, AX
-
- MOV DX, SC_INDEX ; point at the map mask register
- MOV AL, MAP_MASK ;
- OUT DX, AL ;
-
- PLANE_LOOP:
- MOV DX, SC_DATA ; select the current plane
- MOV AL, plane ;
- OUT DX, AL ;
-
- ;-- begin plane painting
- MOV AX, height ; start the row counter
- MOV rowCounter, AX ;
- MOV DI, poffset ; go to the first pixel
- MOV SI, bmpOffset ; go to the bmp pixel
- ROW_LOOP:
- MOV CX, width ; count the columns
- SCAN_LOOP:
- MOVSB ; copy the pixel
- SUB CX, 3 ; we skip the next 3
- ADD SI, 3 ; skip the bmp pixels
- LOOP SCAN_LOOP ; finish the scan
-
- MOV AX, nextPageRow
- ADD DI, AX ; go to the next row on screen
- MOV AX, nextBmpRow
- ADD SI, AX ; go to the next row on bmp
-
- DEC rowCounter
- JNZ ROW_LOOP ; do all the rows
- ;-- end plane painting
-
- MOV AL, plane ; advance to the next plane
- SHL AL, 1 ;
- AND AL, 0x0f ; mask the plane properly
- MOV plane, AL ; store the plane
-
- INC bmpOffset ; start bmp at the right spot
-
- DEC planeCounter
- JNZ PLANE_LOOP ; do all 4 planes
- }
-}
-
-
-void
-modexDrawPlanarBuf(page_t *page, int x, int y, planar_buf_t *bmp) {
- /* TODO - adapt from test code */
- int plane;
- for(plane=0; plane < 4; plane++)
- {
- //fack
- }
-}
-
-
-void
-modexDrawSprite(page_t *page, int x, int y, bitmap_t *bmp) {
- /* draw the whole sprite */
- modexDrawSpriteRegion(page, x, y, 0, 0, bmp->width, bmp->height, bmp);
-}
-
-void
-modexDrawSpriteRegion(page_t *page, int x, int y,
- int rx, int ry, int rw, int rh, bitmap_t *bmp) {
- word poffset = (word)page->data + y*(page->width/4) + x/4;
- byte *data = bmp->data;//+bmp->offset;
- word bmpOffset = (word) data + ry * bmp->width + rx;
- word width = rw;
- word height = rh;
- byte plane = 1 << ((byte) x & 0x03);
- word scanCount = width/4 + (width%4 ? 1 :0);
- word nextPageRow = page->width/4 - scanCount;
- word nextBmpRow = (word) bmp->width - width;
- word rowCounter;
- byte planeCounter = 4;
-
- __asm {
- MOV AX, SCREEN_SEG ; go to the VGA memory
- MOV ES, AX
-
- MOV DX, SC_INDEX ; point at the map mask register
- MOV AL, MAP_MASK ;
- OUT DX, AL ;
-
- PLANE_LOOP:
- MOV DX, SC_DATA ; select the current plane
- MOV AL, plane ;
- OUT DX, AL ;
-
- ;-- begin plane painting
- MOV AX, height ; start the row counter
- MOV rowCounter, AX ;
- MOV DI, poffset ; go to the first pixel
- MOV SI, bmpOffset ; go to the bmp pixel
- ROW_LOOP:
- MOV CX, width ; count the columns
- SCAN_LOOP:
- LODSB
- DEC SI
- CMP AL, 0
- JNE DRAW_PIXEL ; draw non-zero pixels
-
- INC DI ; skip the transparent pixel
- ADD SI, 1
- JMP NEXT_PIXEL
- DRAW_PIXEL:
- MOVSB ; copy the pixel
- NEXT_PIXEL:
- SUB CX, 3 ; we skip the next 3
- ADD SI, 3 ; skip the bmp pixels
- LOOP SCAN_LOOP ; finish the scan
-
- MOV AX, nextPageRow
- ADD DI, AX ; go to the next row on screen
- MOV AX, nextBmpRow
- ADD SI, AX ; go to the next row on bmp
-
- DEC rowCounter
- JNZ ROW_LOOP ; do all the rows
- ;-- end plane painting
-
- MOV AL, plane ; advance to the next plane
- SHL AL, 1 ;
- AND AL, 0x0f ; mask the plane properly
- MOV plane, AL ; store the plane
-
- INC bmpOffset ; start bmp at the right spot
-
- DEC planeCounter
- JNZ PLANE_LOOP ; do all 4 planes
- }
-}
-
-
-/* copy a region of video memory from one page to another.
- * It assumes that the left edge of the tile is the same on both
- * regions and the memory areas do not overlap.
- */
-void
-modexCopyPageRegion(page_t *dest, page_t *src,
- word sx, word sy,
- word dx, word dy,
- word width, word height)
-{
- word doffset = (word)dest->data + dy*(dest->width/4) + dx/4;
- word soffset = (word)src->data + sy*(src->width/4) + sx/4;
- word scans = width/4;
- word nextSrcRow = src->width/4 - scans - 1;
- word nextDestRow = dest->width/4 - scans - 1;
- byte lclip[] = {0x0f, 0x0e, 0x0c, 0x08}; /* clips for rectangles not on 4s */
- byte rclip[] = {0x0f, 0x01, 0x03, 0x07};
- byte left = lclip[sx&0x03];
- byte right = rclip[(sx+width)&0x03];
-
- __asm {
- MOV AX, SCREEN_SEG ; work in the vga space
- MOV ES, AX ;
- MOV DI, doffset ;
- MOV SI, soffset ;
-
- MOV DX, GC_INDEX ; turn off cpu bits
- MOV AX, 0008h ;
- OUT DX, AX
-
- MOV AX, SC_INDEX ; point to the mask register
- MOV DX, AX ;
- MOV AL, MAP_MASK ;
- OUT DX, AL ;
- INC DX ;
-
- ROW_START:
- PUSH DS
- MOV AX, ES
- MOV DS, AX
- MOV CX, scans ; the number of latches
-
- MOV AL, left ; do the left column
- OUT DX, AL ;
- MOVSB ;
- DEC CX ;
-
- MOV AL, 0fh ; do the inner columns
- OUT DX, AL
- REP MOVSB ; copy the pixels
-
- MOV AL, right ; do the right column
- OUT DX, AL
- MOVSB
- POP DS
-
- MOV AX, SI ; go the start of the next row
- ADD AX, nextSrcRow ;
- MOV SI, AX ;
- MOV AX, DI ;
- ADD AX, nextDestRow ;
- MOV DI, AX ;
-
- DEC height ; do the rest of the actions
- JNZ ROW_START ;
-
- MOV DX, GC_INDEX+1 ; go back to CPU data
- MOV AL, 0ffh ; none from latches
- OUT DX, AL ;
- }
-}
-
-
-/* fade and flash */
-void
-modexFadeOn(word fade, byte *palette) {
- fadePalette(-fade, 64, 64/fade+1, palette);
-}
-
-
-void
-modexFadeOff(word fade, byte *palette) {
- fadePalette(fade, 0, 64/fade+1, palette);
-}
-
-
-void
-modexFlashOn(word fade, byte *palette) {
- fadePalette(fade, -64, 64/fade+1, palette);
-}
-
-
-void
-modexFlashOff(word fade, byte *palette) {
- fadePalette(-fade, 0, 64/fade+1, palette);
-}
-
-
-static void
-fadePalette(sbyte fade, sbyte start, word iter, byte *palette) {
- word i;
- byte dim = start;
-
- /* handle the case where we just update */
- if(iter == 0) {
- modexPalUpdate1(palette);
- return;
- }
-
- while(iter > 0) { /* FadeLoop */
- for(i=0; i<PAL_SIZE; i++) { /* loadpal_loop */
- tmppal[i] = palette[i] - dim;
- if(tmppal[i] > 127) {
- tmppal[i] = 0;
- } else if(tmppal[i] > 63) {
- tmppal[i] = 63;
- }
- }
- modexPalUpdate1(tmppal);
- iter--;
- dim += fade;
- }
-}
-
-
-/* save and load */
-void
-modexPalSave(byte *palette) {
- int i;
-
- outp(PAL_READ_REG, 0); /* start at palette entry 0 */
- for(i=0; i<PAL_SIZE; i++) {
- palette[i] = inp(PAL_DATA_REG); /* read the palette data */
- }
-}
-
-
-byte *
-modexNewPal() {
- byte *ptr;
- ptr = malloc(PAL_SIZE);
-
- /* handle errors */
- if(!ptr) {
- printf("Could not allocate palette.\n");
- exit(-1);
- }
-
- return ptr;
-}
-
-
-void
-modexLoadPalFile(byte *filename, byte **palette) {
- FILE *file;
- byte *ptr;
-
- /* free the palette if it exists */
- if(*palette) {
- free(*palette);
- }
-
- /* allocate the new palette */
- *palette = modexNewPal();
-
- /* open the file */
- file = fopen(filename, "rb");
- if(!file) {
- printf("Could not open palette file: %s\n", filename);
- exit(-2);
- }
-
- /* read the file */
- ptr = *palette;
- while(!feof(file)) {
- *ptr++ = fgetc(file);
- }
-
- fclose(file);
-}
-
-
-void
-modexSavePalFile(char *filename, byte *pal) {
- unsigned int i;
- FILE *file;
-
- /* open the file for writing */
- file = fopen(filename, "wb");
- if(!file) {
- printf("Could not open %s for writing\n", filename);
- exit(-2);
- }
-
- /* write the data to the file */
- fwrite(pal, 1, PAL_SIZE, file);
- fclose(file);
-}
-
-
-/* blanking */
-void
-modexPalBlack() {
- fadePalette(-1, 64, 1, tmppal);
-}
-
-
-void
-modexPalWhite() {
- fadePalette(-1, -64, 1, tmppal);
-}
-
-
-/* utility */
-void
-modexPalUpdate(bitmap_t *bmp, word *i, word qp, word aqoffset)
-{
- byte *p = bmp->palette;
- word w=0;
- word q=0;
- word qq=0;
- static word a[PAL_SIZE]; //palette array of change values!
- word z=0, aq=0, aa=0, pp=0;
-
- modexWaitBorder();
- if((*i)==0)
- {
- memset(a, -1, sizeof(a));
- outp(PAL_WRITE_REG, 0); /* start at the beginning of palette */
- }
- else if(qp==0)
- {
- q=(*i);
- }
- else
- {
- q=(*i);
- qq=(*i)/3;
-// printf("q: %02d\n", (q));
-// printf("qq: %02d\n", (qq));
- //printf(" (*i)-q=%02d\n", (*i)-q);
- outp(PAL_WRITE_REG, qq); /* start at the beginning of palette */
- }
- if((*i)<PAL_SIZE/2 && w==0)
- {
- for(; (*i)<PAL_SIZE/2; (*i)++)
- {
- //if(i%3==0 && (p[i+5]==p[i+4] && p[i+4]==p[i+3] && p[i+3]==p[i+2] && p[i+2]==p[i+1] && p[i+1]==p[i] && p[i+5]==p[i]))
-//____ if((qp>0)&&((*i)-q)%3==0 && (p[((*i)-q)]==p[((*i)-q)+3] && p[((*i)-q)+1]==p[((*i)-q)+4] && p[((*i)-q)+2]==p[((*i)-q)+5])) outp(PAL_DATA_REG, p[(*i)-q]); else
- if(((((*i)-q)%3==0)) && (p[((*i)-q)]==p[((*i)-q)+3] && p[((*i)-q)+1]==p[((*i)-q)+4] && p[((*i)-q)+2]==p[((*i)-q)+5]))
- {
- w++;
- break;
- }
- else if(qp>0 && (*i)>=(qp) && (*i)<((qp)+3))
- {
- //printf("qp=%d\n", qp);
- //printf(" (*i)=%d a[%d]=%d\n", (*i), qp, a[qp]);
- printf(" %d's color=%d\n", (*i), (a[qp])-(bmp->offset*3)+qp);
- //outp(PAL_DATA_REG, p[((a[qp])-(bmp->offset*3)+qp)]);// fix this shit!
- if((*i)+1==(qp)+3){ w++; /*(*i)++;*/ break; }
- }
- else
- {
- if(bmp->offset==0 && (*i)<3 && q==0) outp(PAL_DATA_REG, 0);
- else
- if(qp==0) outp(PAL_DATA_REG, p[(*i)-q]);
- else{ //outp(PAL_DATA_REG, p[((*i)-(bmp->offset*3)+qp)]);
- printf("p[]=%d qp=%d p[]-qp=%d\n", ((*i)-(bmp->offset*3)), qp, ((*i)-(bmp->offset*3))+qp); }
- }
- }
- //if(qp>0) printf("qp=%d\n", qp);
- //if(qp>0) printf(" (*i)=%d\n", (*i)/3);
- }
- modexWaitBorder(); /* waits one retrace -- less flicker */
- if((*i)>=PAL_SIZE/2 && w==0)
- {
- for(; (*i)<PAL_SIZE; (*i)++)
- {
-//____ if((qp>0)&&((*i)-q)%3==0 && (p[((*i)-q)]==p[((*i)-q)+3] && p[((*i)-q)+1]==p[((*i)-q)+4] && p[((*i)-q)+2]==p[((*i)-q)+5])) outp(PAL_DATA_REG, p[(*i)-q]); else
- if(((((*i)-q)%3==0)) && (p[((*i)-q)]==p[((*i)-q)+3] && p[((*i)-q)+1]==p[((*i)-q)+4] && p[((*i)-q)+2]==p[((*i)-q)+5]))
- {
- w++;
- break;
- }
- else if(qp>0 && (*i)>=(qp) && (*i)<((qp)+3))
- {
- //printf("qp=%d\n", qp);
- //printf(" (*i)=%d a[%d]=%d\n", (*i), qp, a[qp]);
- printf(" %d's color=%d\n", (*i), (a[qp]-(bmp->offset*3)+qp));
- //outp(PAL_DATA_REG, p[((a[qp])-(bmp->offset*3)+qp)]);// fix this shit!
- if((*i)+1==(qp)+3){ w++; /*(*i)++;*/ break; }
- }
- else
- {
- if(qp==0) outp(PAL_DATA_REG, p[(*i)-q]);
- else{ //outp(PAL_DATA_REG, p[((*i)-(bmp->offset*3)+qp)]);
- printf("p[]=%d qp=%d p[]-qp=%d\n", ((*i)-(bmp->offset*3)), qp, ((*i)-(bmp->offset*3))+qp); }
- }
- }
- //printf(" (*i)=%d\n", (*i)/3);
- }
-
-printf("\nqqqqqqqq\n\n");
-
- //palette checker~
- if(q>0 && qp==0)
- {
- long lq;
- long bufSize = (bmp->width * bmp->height);
- pp = q;
- //printf("1(*i)=%02d\n", (*i)/3);
- //printf("1z=%02d\n", z/3);
- chkcolor(bmp, &q, &a, &aa, &z, i);
- //printf("2(*i)=%02d\n", (*i)/3);
- //printf("2z=%02d\n", z/3);
- aq=0;
-aqpee:
- while(aq<=aa)
- {
-// printf("a[%02d]=(%d)\n", aq, a[aq]);
- if(a[aq]==-1) aq++;
- else { aqoffset++; break; }
- }
-//update the image data here!
- for(lq=0; lq<bufSize; lq++)
- {
- /*
- note to self
- use a[qp] instead of bmp->offset for this spot!
- NO! wwww
- */
-
- /*
- Facking bloody point the values of the changed palette to correct values.... major confusion! wwww
- */
-
- //(offset/bmp->offset)*bmp->offset
-
-
- //printf("%02d ",bmp->data[lq]+bmp->offset);
- //if(lq > 0 && lq%bmp->width==0) printf("\n");
- //printf("%02d_", bmp->data[lq]+bmp->offset);
- /*if(bmp->data[lq]+bmp->offset==aq)
- {
- //printf("%02d", bmp->data[lq]);
- //printf("\n%02d\n", bmp->offset);
- printf("aq=%02d ", aq);
- printf("a[aq]=%02d ", a[aq]);
- printf("a[aq]+aqpp=%02d ", a[aq]+aqpp);
- printf("a[aq]-aqpp=%02d\n", a[aq]-aqpp);
- //bmp->data[lq]=((bmp->data[lq]+bmp->offset)-a[aq]);
-//++++ bmp->data[lq]=a[aq]-aqpp;
-// printf("_%d ", bmp->data[lq]);
- //if(lq > 0 && lq%bmp->width==0) printf("\n");
- }
- else if(bmp->data[lq]+bmp->offset < ((*i)/3)-aqpp)
- {
- if(bmp->data[lq]+bmp->offset >= aq)
- {
- bmp->data[lq]=(bmp->data[lq]+bmp->offset)-aqpp;//-((z-(*i))/3);
- //printf("_%d ", bmp->data[lq]+bmp->offset)-aqpp-((z-(*i))/3);
- }
- else bmp->data[lq]+=(bmp->offset-aqpp);
- }*/
-
- //printf("%02d`", bmp->data[lq]);
- //if(lq > 0 && lq%bmp->width==0) printf("\n");
- }
-
-//printf(" aq=%02d\n", aq);
-//printf(" aa=%02d\n", aa);
-
- //update the palette~
- modexPalUpdate(bmp, &pp, aq, aqoffset);
- (*i)=pp;
-
- if(aq<aa){ pp=q; aq++; goto aqpee; }
- }
-}
-
-void
-modexPalUpdate1(byte *p)
-{
- int i;
- modexWaitBorder();
- outp(PAL_WRITE_REG, 0); /* start at the beginning of palette */
- for(i=0; i<PAL_SIZE/2; i++)
- {
- outp(PAL_DATA_REG, p[i]);
- }
- modexWaitBorder(); /* waits one retrace -- less flicker */
- for(; i<PAL_SIZE; i++)
- {
- outp(PAL_DATA_REG, p[(i)]);
- }
-}
-
-void
-modexPalUpdate0(byte *p)
-{
- int i;
- modexWaitBorder();
- outp(PAL_WRITE_REG, 0); /* start at the beginning of palette */
- for(i=0; i<PAL_SIZE/2; i++)
- {
- outp(PAL_DATA_REG, rand());
- }
- modexWaitBorder(); /* waits one retrace -- less flicker */
- for(; i<PAL_SIZE; i++)
- {
- outp(PAL_DATA_REG, rand());
- }
-}
-
-//color checker~
-//i want to make another vesion that checks the palette when the palette is being appened~
-void chkcolor(bitmap_t *bmp, word *q, word *a, word *aa, word *z, word *i/*, word *offset*/)
-{
- byte *pal;
- word zz=0;
- pal = modexNewPal();
- modexPalSave(pal);
- //printf("q: %02d\n", (*q));
- printf("chkcolor start~\n");
- printf("1 (*z): %d\n", (*z)/3);
- printf("1 (*i): %d\n", (*i)/3);
-// printf("1 offset of color in palette (*q): %d\n", (*q)/3);
- printf("wwwwwwwwwwwwwwww\n");
- //check palette for dups
- for(; (*z)<PAL_SIZE; (*z)+=3)
- {
- //printf("\n z: %d\n", (*z));
- //printf(" q: %d\n", (*q));
- //printf(" z+q: %d\n\n", ((*z)+(*q)));
- //if((*z)%3==0)
- //{
-//---- if(pal[(*z)]==pal[(*z)+3] && pal[(*z)+1]==pal[(*z)+4] && pal[(*z)+2]==pal[(*z)+5])
- if((*z)==(*i))
- {
-// printf("\n%d [%02d][%02d][%02d]\n", (*z), pal[(*z)], pal[(*z)+1], pal[(*z)+2]);
-// printf("%d [%02d][%02d][%02d]\n\n", (*z)+3, pal[(*z)+3], pal[(*z)+4], pal[(*z)+5]);
-//0000 (*z)-=3;
- break;
- }
- else for(zz=0; zz<(*q); zz+=3)
- {
- //printf("zz: %02d\n", zz/3);
- if(zz%3==0)
- {
- if(pal[((*z)+(*q))]==pal[((*z)+(*q))+3] && pal[((*z)+(*q))+1]==pal[((*z)+(*q))+4] && pal[((*z)+(*q))+2]==pal[((*z)+(*q))+5]) //break if duplicate colors found in palette because it have reached the end of the current data of the palette
- {
-// (*z)-=3;
-// (*i)-=3;
-// printf("\nzq1:%d[%02d][%02d][%02d]\n", (zz+q), pal[(zz+q)], pal[(zz+q)+1], pal[(zz+q)+2]);
-// printf("zq2:%d[%02d][%02d][%02d]\n\n", (zz+q)+3, pal[(zz+q)+3], pal[(zz+q)+4], pal[(zz+q)+5]);
- break;
- }
- else if(pal[zz]==pal[((*z)+(*q))] && pal[zz+1]==pal[((*z)+(*q))+1] && pal[zz+2]==pal[((*z)+(*q))+2])
- {
-// printf("\n\nwwwwwwwwwwwwwwww\n");
-// printf(" zq: %d [%02d][%02d][%02d] value that is needing to be changed~\n", ((*z)+(*q))/3, pal[((*z)+(*q))], pal[((*z)+(*q))+1], pal[((*z)+(*q))+2]);
-// printf(" zz: %d [%02d][%02d][%02d] value that the previous value is going to change to~\n", (zz)/3, pal[zz], pal[zz+1], pal[zz+2]);
-// //printf(" zv: %d [%02d][%02d][%02d] wwww\n", (zz-z+q)/3, pal[(zz-z+q)], pal[(zz-z+q)+1], pal[(zz-z+q)+2]);
-// printf(" z : %d [%02d][%02d][%02d] offset value~\n", (*z)/3, pal[(*z)], pal[(*z)+1], pal[(*z)+2]);
-//++++ (*i)--;
-// (*z)--;
- //expand dong here
-/*
-planned features that i plan to implement~
-image that has values on the pallete list!
-wwww
-no... wait.... no wwww
-*/
- //for(zzii=0; zzii<3; zzii++)
- //{
- //printf("z+q: %d\n\n", ((*z)+(*q)));
- a[(((*z)+(*q)))]=zz;
- //}
- (*aa)=(((*z)+(*q)));
- printf("!! a[%02d]: %d\n", (((*z)+(*q))/3), zz/3);
-// printf("\n aa: %d\n\n", (*aa));
-// printf(" a[%02d]=(%02d) offset array i think the palette should be updated again~\n", ((*z)+(*q))/3, a[((*z)+(*q))/3]);
-// printf("wwwwwwwwwwwwwwww\n\n");
- }
- /*else
- {
- printf("================\n");
- printf("zq: %d [%02d][%02d][%02d]\n", ((*z)+(*q))/3, pal[((*z)+(*q))], pal[((*z)+(*q))+1], pal[((*z)+(*q))+2]);
- printf("zz: %d [%02d][%02d][%02d]\n", (zz)/3, pal[zz], pal[zz+1], pal[zz+2]);
- printf("z : %d [%02d][%02d][%02d]\n", (*z)/3, pal[(*z)], pal[(*z)+1], pal[(*z)+2]);
- printf("================\n");
- }*/
- //printf("[%d]", (zz+q));
- }
- }
- }
- printf("wwwwwwwwwwwwwwww\n");
- printf("2 (*z): %d\n", (*z)/3);
- printf("2 (*i): %d\n", (*i)/3);
-// printf("2 offset of color in palette (*q): %d\n", (*q)/3);
- printf("chkcolor end~\n");
- free(pal);
-}
-
-void
-modexWaitBorder() {
- while(inp(INPUT_STATUS_1) & 8) {
- /* spin */
- }
-
- while(!(inp(INPUT_STATUS_1) & 8)) {
- /* spin */
- }
-}
-
-/*****************************************************************************\r
-find 8x8 font in VGA BIOS ROM\r
-*****************************************************************************/\r
-byte far *bios_8x8_font(void)\r