\r
switch(vq)\r
{\r
- case 0:\r
- //case 1://----\r
+ case 1:\r
CRTParmCount = sizeof(ModeX_320x240regs) / sizeof(ModeX_320x240regs[0]);\r
/* width and height */\r
gv->video.page[0].sw=320;\r
ptr[i] = 0x0000;\r
}\r
break;\r
- //++++\r
- case 1:\r
+ case 2:\r
+ CRTParmCount = sizeof(ModeX_160x120regs) / sizeof(ModeX_160x120regs[0]);\r
+ /* width and height */\r
+ gv->video.page[0].sw=120;\r
+ gv->video.page[0].sh=160;\r
+\r
+ /* send the CRTParms */\r
+ for(i=0; i<CRTParmCount; i++) {\r
+ outpw(CRTC_INDEX, ModeX_160x120regs[i]);\r
+ }\r
+\r
+ /* clear video memory */\r
+ outpw(SC_INDEX, 0x0f02);\r
+ for(i=0; i<0x8000; i++) {\r
+ ptr[i] = 0x0000;\r
+ }\r
+ break;\r
+ case 3:\r
+ CRTParmCount = sizeof(ModeX_320x200regs) / sizeof(ModeX_320x200regs[0]);\r
+ /* width and height */\r
+ gv->video.page[0].sw=320;\r
+ gv->video.page[0].sh=200;\r
+\r
+ /* send the CRTParms */\r
+ for(i=0; i<CRTParmCount; i++) {\r
+ outpw(CRTC_INDEX, ModeX_320x200regs[i]);\r
+ }\r
+\r
+ /* clear video memory */\r
+ outpw(SC_INDEX, 0x0f02);\r
+ for(i=0; i<0x8000; i++) {\r
+ ptr[i] = 0x0000;\r
+ }\r
+ break;\r
+ case 4:\r
CRTParmCount = sizeof(ModeX_192x144regs) / sizeof(ModeX_192x144regs[0]);\r
/* width and height */\r
gv->video.page[0].sw=192;\r
outpw(CRTC_INDEX, ModeX_192x144regs[i]);\r
}\r
\r
+ /* clear video memory */\r
+ outpw(SC_INDEX, 0x0f02);\r
+ for(i=0; i<0x8000; i++) {\r
+ ptr[i] = 0x0000;\r
+ }\r
+ break;\r
+ case 5:\r
+ CRTParmCount = sizeof(ModeX_256x192regs) / sizeof(ModeX_256x192regs[0]);\r
+ /* width and height */\r
+ gv->video.page[0].sw=256;\r
+ gv->video.page[0].sh=192;\r
+\r
+ /* send the CRTParms */\r
+ for(i=0; i<CRTParmCount; i++) {\r
+ outpw(CRTC_INDEX, ModeX_256x192regs[i]);\r
+ }\r
+\r
/* clear video memory */\r
outpw(SC_INDEX, 0x0f02);\r
for(i=0; i<0x8000; i++) {\r
\r
/* reprogram the CRT controller */\r
outp(CRTC_INDEX, 0x11); /* VSync End reg contains register write prot */\r
- temp = inp(CRTC_DATA) & 0x7F;\r
- outp(CRTC_INDEX, 0x11);\r
-// outp(CRTC_DATA, 0x7f); /* get current write protect on varios regs */\r
- outp(CRTC_DATA, temp); /* get current write protect on varios regs */\r
+// temp = inp(CRTC_DATA) & 0x7F;\r
+// outp(CRTC_INDEX, 0x11);\r
+ outp(CRTC_DATA, 0x7f); /* get current write protect on varios regs */\r
+// outp(CRTC_DATA, temp); /* get current write protect on varios regs */\r
}\r
\r
page_t\r
page.th = page.sh/TILEWH;\r
page.tilemidposscreenx = page.tw/2;\r
page.tilemidposscreeny = (page.th/2)+1;\r
+ page.tilesw=p->tilesw;\r
+ page.tilesh=p->tilesh;\r
//pageSize = p->sw*p->sh;\r
page.id = 0;\r
\r
}\r
}\r
\r
+//TODO! ADD CLIPPING!!\r
+//memory management needs to be added\r
+//void\r
+//modexDrawBmpRegion (page_t *page, int x, int y, int rx, int ry, int rw, int rh, bitmap_t *bmp)\r
+void modexDrawPBufRegion (page_t *page, int x, int y, int rx, int ry, int rw, int rh, planar_buf_t *p, boolean sprite)\r
+{\r
+ int plane;\r
+ int px, py, i;\r
+ px=x;\r
+ py=y;\r
+ for(plane=0; plane < 4; plane++) {\r
+ i=(rx/4)+((rx/4)*ry);\r
+ modexSelectPlane(PLANE(plane+x));\r
+ for(; y < py+rh; y++) {\r
+ //for(px=0; px < p->width; px++) {\r
+ //printf("%02X ", (int) p->plane[plane][i++]);\r
+// _fmemcpy(buff, &(p->plane[plane][i+=p->pwidth]), p->pwidth);\r
+// printf("buff %u==%s\n", y, *buff);\r
+ _fmemcpy(page->data + (((page->width/4) * (y+page->dy)) + ((x+page->dx) / 4)), &(p->plane[plane][i+=rw]), rw/4);\r
+ //}\r
+ }\r
+ x=px;\r
+ y=py;\r
+ }\r
+}\r
+\r
\r
+/*temp*/\r
void\r
-oldDrawBmp(byte far* page, int x, int y, bitmap_t *bmp, byte sprite)\r
+DrawPBuf(page_t *page, int x, int y, planar_buf_t *p, boolean sprite)\r
{\r
- byte plane;\r
- word px, py;\r
- word offset;\r
-\r
- /* TODO Make this fast. It's SLOOOOOOW */\r
+ int plane;\r
+ int px, py, i;\r
+// byte near *buff;\r
+ px=x;\r
+ py=y;\r
+// buff = _nmalloc(p->pwidth+1);\r
+ // TODO Make this fast. It's SLOOOOOOW\r
+// for(plane=0; plane < 4; plane++) {\r
+// i=0;\r
+// modexSelectPlane(PLANE(plane+x));\r
+// for(px = plane; px < p->width; px+=4) {\r
+// offset=px;\r
+// for(py=0; py<p->height/2; py++) {\r
+// //SELECT_ALL_PLANES();\r
+// if(!sprite || p->plane[offset])\r
+// page->data = &(p->plane[offset][i++]);\r
+// offset+=p->width;\r
+// offset++;\r
+// }\r
+// }\r
+// }\r
for(plane=0; plane < 4; plane++) {\r
+ i=0;\r
modexSelectPlane(PLANE(plane+x));\r
- for(px = plane; px < bmp->width; px+=4) {\r
- offset=px;\r
- for(py=0; py<bmp->height; py++) {\r
- if(!sprite || bmp->data[offset])\r
- page[PAGE_OFFSET(x+px, y+py)] = bmp->data[offset];\r
- offset+=bmp->width;\r
- }\r
+ for(; y < py+p->height; y++) {\r
+ //for(px=0; px < p->width; px++) {\r
+ //printf("%02X ", (int) p->plane[plane][i++]);\r
+// _fmemcpy(buff, &(p->plane[plane][i+=p->pwidth]), p->pwidth);\r
+// printf("buff %u==%s\n", y, *buff);\r
+// _fmemcpy(page->data + (((page->width/4) * (y+page->dy)) + ((x+page->dx) / 4)), buff, p->pwidth);\r
+ _fmemcpy(page->data + (((page->width/4) * (y+page->dy)) + ((x+page->dx) / 4)), &(p->plane[plane][i+=p->pwidth]), p->pwidth);\r
+ //}\r
}\r
+ x=px;\r
+ y=py;\r
}\r
+// _nfree(buff);\r
}\r
\r
void\r
-CDrawBmp(byte far* vgamem, page_t* page, int x, int y, bitmap_t *bmp, byte sprite)\r
+oldDrawBmp(byte far* page, int x, int y, bitmap_t *bmp, byte sprite)\r
{\r
byte plane;\r
word px, py;\r
- word offset=0;\r
-\r
+ word offset;\r
\r
/* TODO Make this fast. It's SLOOOOOOW */\r
for(plane=0; plane < 4; plane++) {\r
offset=px;\r
for(py=0; py<bmp->height; py++) {\r
if(!sprite || bmp->data[offset])\r
- //modexputPixel(page, x+px, y+py, bmp->data[offset]);\r
- vgamem[PAGE_OFFSET(x+px, y+py)] = bmp->data[offset];\r
+ page[PAGE_OFFSET(x+px, y+py)] = bmp->data[offset];\r
offset+=bmp->width;\r
}\r
}\r
modexDrawBmpRegion(page, x, y, 0, 0, bmp->width, bmp->height, bmp);\r
}\r
\r
-\r
void\r
modexDrawBmpRegion(page_t *page, int x, int y,\r
int rx, int ry, int rw, int rh, bitmap_t *bmp) {\r
}\r
}\r
\r
-void\r
-modex_sparky4_DrawBmpRegion(page_t *page, int x, int y,\r
- int rx, int ry, int rw, int rh, bitmap_t *bmp) {\r
- word poffset = (word) page->data + y*(page->width/4) + x/4;\r
- byte far *data = bmp->data;//+bmp->offset;\r
- word bmpOffset = (word) data + ry * bmp->width + rx;\r
- word width = rw;\r
- word height = rh;\r
- byte plane = 1 << ((byte) x & 0x03);\r
- word scanCount = width/4 + (width%4 ? 1 :0);\r
- word nextPageRow = page->width/4 - scanCount;\r
- word nextBmpRow = (word) bmp->width - width;\r
- word rowCounter;\r
- byte planeCounter = 4;\r
-\r
-/* printf("bmp->data=%Fp\n",bmp->data);\r
- printf("*bmp->data=%Fp\n",*(bmp->data));\r
- printf("&bmp->data=%Fp\n",&(bmp->data));*/\r
-\r
- //code is a bit slow here\r
- __asm {\r
- MOV AX, SCREEN_SEG ; go to the VGA memory\r
- MOV ES, AX\r
-\r
- MOV DX, SC_INDEX ; point at the map mask register\r
- MOV AL, MAP_MASK ;\r
- OUT DX, AL ;\r
-\r
- PLANE_LOOP:\r
- MOV DX, SC_DATA ; select the current plane\r
- MOV AL, plane ;\r
- OUT DX, AL ;\r
-\r
- ;-- begin plane painting\r
- MOV AX, height ; start the row counter\r
- MOV rowCounter, AX ;\r
- MOV DI, poffset ; go to the first pixel\r
- MOV SI, bmpOffset ; go to the bmp pixel\r
- ROW_LOOP:\r
- MOV CX, width ; count the columns\r
- SCAN_LOOP:\r
- MOVSB ; copy the pixel\r
- SUB CX, 3 ; we skip the next 3\r
- ADD SI, 3 ; skip the bmp pixels\r
- LOOP SCAN_LOOP ; finish the scan\r
-\r
- MOV AX, nextPageRow\r
- ADD DI, AX ; go to the next row on screen\r
- MOV AX, nextBmpRow\r
- ADD SI, AX ; go to the next row on bmp\r
-\r
- DEC rowCounter\r
- JNZ ROW_LOOP ; do all the rows\r
- ;-- end plane painting\r
-\r
- MOV AL, plane ; advance to the next plane\r
- SHL AL, 1 ;\r
- AND AL, 0x0f ; mask the plane properly\r
- MOV plane, AL ; store the plane\r
-\r
- INC bmpOffset ; start bmp at the right spot\r
-\r
- DEC planeCounter\r
- JNZ PLANE_LOOP ; do all 4 planes\r
- }\r
-}\r
-\r
-void\r
-modexDrawPlanarBuf(page_t *page, int x, int y, planar_buf_t *bmp) {\r
- /* TODO - adapt from test code */\r
- int plane;\r
- for(plane=0; plane < 4; plane++)\r
- {\r
- //fack\r
- }\r
-}\r
-\r
-\r
void\r
modexDrawSprite(page_t *page, int x, int y, bitmap_t *bmp) {\r
/* draw the whole sprite */\r
}\r
}\r
\r
-\r
/* copy a region of video memory from one page to another.\r
* It assumes that the left edge of the tile is the same on both\r
* regions and the memory areas do not overlap.\r
}\r
}\r
\r
+void\r
+modexPalOverscan(byte *p, word col)\r
+{\r
+ modexWaitBorder();\r
+ outp(PAL_WRITE_REG, 0); /* start at the beginning of palette */\r
+ outp(PAL_DATA_REG, col);\r
+}\r
+\r
//color checker~\r
//i want to make another vesion that checks the palette when the palette is being appened~\r
void chkcolor(bitmap_t *bmp, word *q, word *a, word *aa, word *z, word *i/*, word *offset*/)\r
word addr = (word) l;\r
word chw=0;\r
byte c;\r
+ //byte near *bakapee;\r
\r
switch(t)\r
{\r
DEC CX\r
JNZ L1\r
}\r
-\r
+ //bakapee = _nmalloc(sizeof(byte)*8);\r
+//TODO: OPTIMIZE THIS!!!!\r
for(i=0; i<w; i++)\r
{\r
+ /*modexSelectPlane(PLANE(x));\r
+ j=1<<8;\r
+ *bakapee=(l[i] & j ? col:bgcol);\r
+ _fmemcpy(page->data + (((page->width/4) * (y+page->dy+i)) + ((x+page->dx+chw) / 4)), bakapee, 8);*/\r
j=1<<8;\r
xp=0;\r
while(j)\r
}\r
chw += xp;\r
}\r
+ //_nfree(bakapee);\r
}\r
\r
void modexprintbig(page_t *page, word x, word y, word t, word col, word bgcol, const byte *str)\r
projects / 16.git / blobdiff