wwww merged

[16.git] / src / vrstest.c

diff --git a/src/vrstest.c b/src/vrstest.c
index e90d10e84df362b138cf0bf2fe848e3c88cdd6c0..a65eee090c832b889c923853af5e1c34f8252d4f 100755 (executable)
--- a/src/vrstest.c
+++ b/src/vrstest.c
@@ -55,14 +55,41 @@ void main() {
        word w=0;
 
 
+
+       // DOSLIB: check our environment
+       probe_dos();
+
+       // DOSLIB: what CPU are we using?
+       // NTS: I can see from the makefile Sparky4 intends this to run on 8088 by the -0 switch in CFLAGS.
+       //      So this code by itself shouldn't care too much what CPU it's running on. Except that other
+       //      parts of this project (DOSLIB itself) rely on CPU detection to know what is appropriate for
+       //      the CPU to carry out tasks. --J.C.
+       cpu_probe();
+
+       // DOSLIB: check for VGA
+       if (!probe_vga()) {
+               printf("VGA probe failed\n");
+               return;
+       }
+       // hardware must be VGA or higher!
+       if (!(vga_state.vga_flags & VGA_IS_VGA)) {
+               printf("This program requires VGA or higher graphics hardware\n");
+               return;
+       }
+
+       //bmp = bitmapLoadPcx("data/chikyuu.pcx");
+       gvar.video.page[0]=modexDefaultPage(&gvar.video.page[0]);
+
        mm.mmstarted=0;
        MM_Startup(&mm, &mmi);
        CA_Startup(&gvar);
+       // What should be done by read_vrs:
+       sega = (mm.bufferseg);
        if(CA_LoadFile("data/spri/chikyuu.vrs", &bigbuffer, &mm, &mmi)) baka=1; else baka=0;
-//     fd = open("data/spri/chikyuu.vrs", O_RDONLY|O_BINARY);
-//     size = lseek(fd, 0, SEEK_END);
-//     lseek(fd, 0, SEEK_SET);
-//     close(fd);
+       fd = open("data/spri/chikyuu.vrs", O_RDONLY|O_BINARY);
+       size = lseek(fd, 0, SEEK_END);
+       lseek(fd, 0, SEEK_SET);
+       close(fd);
        // Insert sanity cheks later
        vrs.buffer = bigbuffer;
        vrs.data_size = size - sizeof(struct vrl1_vgax_header);
@@ -92,6 +119,7 @@ void main() {
        }
        vrs.vrl_line_offsets = vrl_line_offsets;
 
+
        //read_vrs(&gvar, "data/spri/chikyuu.vrs", &vrs);
        spri.spritesheet = &vrs;
        spri.sprite_vrl_cont = malloc(sizeof(struct vrl_container));
@@ -104,33 +132,8 @@ void main() {
        spri.y = 100;
 
 //     Uncomment to see broken sprites
-       //if(CA_ReadFile("data/spri/CHUBACW1.vrl", &bigbuffer, &mm)) baka=1; else baka=0;
-       //if(CA_LoadFile("data/spri/CHUBACW1.vrl", &bbuffer, &mm, &mmi)) baka=1; else baka=0;
-
-       // DOSLIB: check our environment
-       probe_dos();
-
-       // DOSLIB: what CPU are we using?
-       // NTS: I can see from the makefile Sparky4 intends this to run on 8088 by the -0 switch in CFLAGS.
-       //      So this code by itself shouldn't care too much what CPU it's running on. Except that other
-       //      parts of this project (DOSLIB itself) rely on CPU detection to know what is appropriate for
-       //      the CPU to carry out tasks. --J.C.
-       cpu_probe();
-
-       // DOSLIB: check for VGA
-       if (!probe_vga()) {
-               printf("VGA probe failed\n");
-               return;
-       }
-       // hardware must be VGA or higher!
-       if (!(vga_state.vga_flags & VGA_IS_VGA)) {
-               printf("This program requires VGA or higher graphics hardware\n");
-               return;
-       }
-
-       //bmp = bitmapLoadPcx("data/chikyuu.pcx");
-       gvar.video.page[0]=modexDefaultPage(&gvar.video.page[0]);
-
+/*     sega = mm.bufferseg;
+       if(CA_LoadFile("data/spri/CHUBACW1.vrl", &bigbuffer, &mm, &mmi)) baka=1; else baka=0;*/
 
        /* clear and draw one sprite and one bitmap */
        VGAmodeX(1, 1, &gvar);