16/adplug/adplug/doc/Makefile.in

   1 # Makefile.in generated by automake 1.11.1 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
   5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
   6 # Inc.
   7 # This Makefile.in is free software; the Free Software Foundation
   8 # gives unlimited permission to copy and/or distribute it,
   9 # with or without modifications, as long as this notice is preserved.
  10
  11 # This program is distributed in the hope that it will be useful,
  12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  14 # PARTICULAR PURPOSE.
  15
  16 @SET_MAKE@
  17 VPATH = @srcdir@
  18 pkgdatadir = $(datadir)/@PACKAGE@
  19 pkgincludedir = $(includedir)/@PACKAGE@
  20 pkglibdir = $(libdir)/@PACKAGE@
  21 pkglibexecdir = $(libexecdir)/@PACKAGE@
  22 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  23 install_sh_DATA = $(install_sh) -c -m 644
  24 install_sh_PROGRAM = $(install_sh) -c
  25 install_sh_SCRIPT = $(install_sh) -c
  26 INSTALL_HEADER = $(INSTALL_DATA)
  27 transform = $(program_transform_name)
  28 NORMAL_INSTALL = :
  29 PRE_INSTALL = :
  30 POST_INSTALL = :
  31 NORMAL_UNINSTALL = :
  32 PRE_UNINSTALL = :
  33 POST_UNINSTALL = :
  34 build_triplet = @build@
  35 host_triplet = @host@
  36 subdir = doc
  37 DIST_COMMON = $(libadplug_TEXINFOS) $(srcdir)/Makefile.am \
  38         $(srcdir)/Makefile.in $(srcdir)/stamp-vti \
  39         $(srcdir)/version.texi mdate-sh texinfo.tex
  40 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  41 am__aclocal_m4_deps = $(top_srcdir)/configure.in
  42 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  43         $(ACLOCAL_M4)
  44 mkinstalldirs = $(install_sh) -d
  45 CONFIG_CLEAN_FILES =
  46 CONFIG_CLEAN_VPATH_FILES =
  47 SOURCES =
  48 DIST_SOURCES =
  49 INFO_DEPS = $(srcdir)/libadplug.info
  50 am__TEXINFO_TEX_DIR = $(srcdir)
  51 DVIS = libadplug.dvi
  52 PDFS = libadplug.pdf
  53 PSS = libadplug.ps
  54 HTMLS = libadplug.html
  55 TEXINFOS = libadplug.texi
  56 TEXI2DVI = texi2dvi
  57 TEXI2PDF = $(TEXI2DVI) --pdf --batch
  58 MAKEINFOHTML = $(MAKEINFO) --html
  59 AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
  60 DVIPS = dvips
  61 am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"
  62 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
  63 am__vpath_adj = case $$p in \
  64     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
  65     *) f=$$p;; \
  66   esac;
  67 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
  68 am__install_max = 40
  69 am__nobase_strip_setup = \
  70   srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
  71 am__nobase_strip = \
  72   for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
  73 am__nobase_list = $(am__nobase_strip_setup); \
  74   for p in $$list; do echo "$$p $$p"; done | \
  75   sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  76   $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
  77     if (++n[$$2] == $(am__install_max)) \
  78       { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
  79     END { for (dir in files) print dir, files[dir] }'
  80 am__base_list = \
  81   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  82   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
  83 man1dir = $(mandir)/man1
  84 NROFF = nroff
  85 MANS = $(man_MANS)
  86 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
  87 ACLOCAL = @ACLOCAL@
  88 AMTAR = @AMTAR@
  89 AR = @AR@
  90 AUTOCONF = @AUTOCONF@
  91 AUTOHEADER = @AUTOHEADER@
  92 AUTOMAKE = @AUTOMAKE@
  93 AWK = @AWK@
  94 CC = @CC@
  95 CCDEPMODE = @CCDEPMODE@
  96 CFLAGS = @CFLAGS@
  97 CPP = @CPP@
  98 CPPFLAGS = @CPPFLAGS@
  99 CXX = @CXX@
 100 CXXCPP = @CXXCPP@
 101 CXXDEPMODE = @CXXDEPMODE@
 102 CXXFLAGS = @CXXFLAGS@
 103 CYGPATH_W = @CYGPATH_W@
 104 DEFS = @DEFS@
 105 DEPDIR = @DEPDIR@
 106 DSYMUTIL = @DSYMUTIL@
 107 DUMPBIN = @DUMPBIN@
 108 ECHO_C = @ECHO_C@
 109 ECHO_N = @ECHO_N@
 110 ECHO_T = @ECHO_T@
 111 EGREP = @EGREP@
 112 EXEEXT = @EXEEXT@
 113 FGREP = @FGREP@
 114 GETOPT_SOURCES = @GETOPT_SOURCES@
 115 GREP = @GREP@
 116 INSTALL = @INSTALL@
 117 INSTALL_DATA = @INSTALL_DATA@
 118 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 119 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 120 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 121 LD = @LD@
 122 LDFLAGS = @LDFLAGS@
 123 LIBOBJS = @LIBOBJS@
 124 LIBS = @LIBS@
 125 LIBTOOL = @LIBTOOL@
 126 LIPO = @LIPO@
 127 LN_S = @LN_S@
 128 LTLIBOBJS = @LTLIBOBJS@
 129 MAINT = @MAINT@
 130 MAKEINFO = @MAKEINFO@
 131 MKDIR_P = @MKDIR_P@
 132 NM = @NM@
 133 NMEDIT = @NMEDIT@
 134 OBJDUMP = @OBJDUMP@
 135 OBJEXT = @OBJEXT@
 136 OTOOL = @OTOOL@
 137 OTOOL64 = @OTOOL64@
 138 PACKAGE = @PACKAGE@
 139 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 140 PACKAGE_NAME = @PACKAGE_NAME@
 141 PACKAGE_STRING = @PACKAGE_STRING@
 142 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 143 PACKAGE_URL = @PACKAGE_URL@
 144 PACKAGE_VERSION = @PACKAGE_VERSION@
 145 PATH_SEPARATOR = @PATH_SEPARATOR@
 146 PKG_CONFIG = @PKG_CONFIG@
 147 RANLIB = @RANLIB@
 148 SED = @SED@
 149 SET_MAKE = @SET_MAKE@
 150 SHELL = @SHELL@
 151 STRIP = @STRIP@
 152 VERSION = @VERSION@
 153 abs_builddir = @abs_builddir@
 154 abs_srcdir = @abs_srcdir@
 155 abs_top_builddir = @abs_top_builddir@
 156 abs_top_srcdir = @abs_top_srcdir@
 157 ac_ct_CC = @ac_ct_CC@
 158 ac_ct_CXX = @ac_ct_CXX@
 159 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 160 am__include = @am__include@
 161 am__leading_dot = @am__leading_dot@
 162 am__quote = @am__quote@
 163 am__tar = @am__tar@
 164 am__untar = @am__untar@
 165 bindir = @bindir@
 166 build = @build@
 167 build_alias = @build_alias@
 168 build_cpu = @build_cpu@
 169 build_os = @build_os@
 170 build_vendor = @build_vendor@
 171 builddir = @builddir@
 172 datadir = @datadir@
 173 datarootdir = @datarootdir@
 174 docdir = @docdir@
 175 dvidir = @dvidir@
 176 exec_prefix = @exec_prefix@
 177 host = @host@
 178 host_alias = @host_alias@
 179 host_cpu = @host_cpu@
 180 host_os = @host_os@
 181 host_vendor = @host_vendor@
 182 htmldir = @htmldir@
 183 includedir = @includedir@
 184 infodir = @infodir@
 185 install_sh = @install_sh@
 186 libbinio_CFLAGS = @libbinio_CFLAGS@
 187 libbinio_LIBS = @libbinio_LIBS@
 188 libdir = @libdir@
 189 libexecdir = @libexecdir@
 190 localedir = @localedir@
 191 localstatedir = @localstatedir@
 192 lt_ECHO = @lt_ECHO@
 193 mandir = @mandir@
 194 mkdir_p = @mkdir_p@
 195 oldincludedir = @oldincludedir@
 196 pdfdir = @pdfdir@
 197 prefix = @prefix@
 198 program_transform_name = @program_transform_name@
 199 psdir = @psdir@
 200 sbindir = @sbindir@
 201 sharedstatedir = @sharedstatedir@
 202 srcdir = @srcdir@
 203 sysconfdir = @sysconfdir@
 204 target_alias = @target_alias@
 205 top_build_prefix = @top_build_prefix@
 206 top_builddir = @top_builddir@
 207 top_srcdir = @top_srcdir@
 208 info_TEXINFOS = libadplug.texi
 209 libadplug_TEXINFOS = fdl.texi
 210 man_MANS = adplugdb.1
 211 EXTRA_DIST = adplugdb.1.in
 212 MOSTLYCLEANFILES = stamp-vti libadplug.info libadplug.info-1 \
 213         libadplug.info-2
 214
 215 CLEANFILES = libadplug.cps libadplug.fns libadplug.vrs
 216 DISTCLEANFILES = adplugdb.1
 217 MAINTAINERCLEANFILES = version.texi
 218 edit = sed \
 219         -e 's,@sharedstatedir\@,$(sharedstatedir),g' \
 220         -e 's,@VERSION\@,$(VERSION),g'
 221
 222 all: all-am
 223
 224 .SUFFIXES:
 225 .SUFFIXES: .dvi .html .info .pdf .ps .texi
 226 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
 227         @for dep in $?; do \
 228           case '$(am__configure_deps)' in \
 229             *$$dep*) \
 230               ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
 231                 && { if test -f $@; then exit 0; else break; fi; }; \
 232               exit 1;; \
 233           esac; \
 234         done; \
 235         echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
 236         $(am__cd) $(top_srcdir) && \
 237           $(AUTOMAKE) --gnu doc/Makefile
 238 .PRECIOUS: Makefile
 239 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 240         @case '$?' in \
 241           *config.status*) \
 242             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 243           *) \
 244             echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 245             cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 246         esac;
 247
 248 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 249         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 250
 251 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 252         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 253 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 254         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 255 $(am__aclocal_m4_deps):
 256
 257 mostlyclean-libtool:
 258         -rm -f *.lo
 259
 260 clean-libtool:
 261         -rm -rf .libs _libs
 262
 263 .texi.info:
 264         restore=: && backupdir="$(am__leading_dot)am$$$$" && \
 265         am__cwd=`pwd` && $(am__cd) $(srcdir) && \
 266         rm -rf $$backupdir && mkdir $$backupdir && \
 267         if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
 268           for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
 269             if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
 270           done; \
 271         else :; fi && \
 272         cd "$$am__cwd"; \
 273         if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
 274          -o $@ $<; \
 275         then \
 276           rc=0; \
 277           $(am__cd) $(srcdir); \
 278         else \
 279           rc=$$?; \
 280           $(am__cd) $(srcdir) && \
 281           $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
 282         fi; \
 283         rm -rf $$backupdir; exit $$rc
 284
 285 .texi.dvi:
 286         TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
 287         MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
 288         $(TEXI2DVI) $<
 289
 290 .texi.pdf:
 291         TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
 292         MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
 293         $(TEXI2PDF) $<
 294
 295 .texi.html:
 296         rm -rf $(@:.html=.htp)
 297         if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
 298          -o $(@:.html=.htp) $<; \
 299         then \
 300           rm -rf $@; \
 301           if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
 302             mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
 303         else \
 304           if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
 305             rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
 306           exit 1; \
 307         fi
 308 $(srcdir)/libadplug.info: libadplug.texi $(srcdir)/version.texi $(libadplug_TEXINFOS)
 309 libadplug.dvi: libadplug.texi $(srcdir)/version.texi $(libadplug_TEXINFOS)
 310 libadplug.pdf: libadplug.texi $(srcdir)/version.texi $(libadplug_TEXINFOS)
 311 libadplug.html: libadplug.texi $(srcdir)/version.texi $(libadplug_TEXINFOS)
 312 $(srcdir)/version.texi: @MAINTAINER_MODE_TRUE@ $(srcdir)/stamp-vti
 313 $(srcdir)/stamp-vti: libadplug.texi $(top_srcdir)/configure
 314         @(dir=.; test -f ./libadplug.texi || dir=$(srcdir); \
 315         set `$(SHELL) $(srcdir)/mdate-sh $$dir/libadplug.texi`; \
 316         echo "@set UPDATED $$1 $$2 $$3"; \
 317         echo "@set UPDATED-MONTH $$2 $$3"; \
 318         echo "@set EDITION $(VERSION)"; \
 319         echo "@set VERSION $(VERSION)") > vti.tmp
 320         @cmp -s vti.tmp $(srcdir)/version.texi \
 321           || (echo "Updating $(srcdir)/version.texi"; \
 322               cp vti.tmp $(srcdir)/version.texi)
 323         -@rm -f vti.tmp
 324         @cp $(srcdir)/version.texi $@
 325
 326 mostlyclean-vti:
 327         -rm -f vti.tmp
 328
 329 maintainer-clean-vti:
 330 @MAINTAINER_MODE_TRUE@  -rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi
 331 .dvi.ps:
 332         TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
 333         $(DVIPS) -o $@ $<
 334
 335 uninstall-dvi-am:
 336         @$(NORMAL_UNINSTALL)
 337         @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
 338         for p in $$list; do \
 339           $(am__strip_dir) \
 340           echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
 341           rm -f "$(DESTDIR)$(dvidir)/$$f"; \
 342         done
 343
 344 uninstall-html-am:
 345         @$(NORMAL_UNINSTALL)
 346         @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
 347         for p in $$list; do \
 348           $(am__strip_dir) \
 349           echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
 350           rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
 351         done
 352
 353 uninstall-info-am:
 354         @$(PRE_UNINSTALL)
 355         @if test -d '$(DESTDIR)$(infodir)' && \
 356             (install-info --version && \
 357              install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
 358           list='$(INFO_DEPS)'; \
 359           for file in $$list; do \
 360             relfile=`echo "$$file" | sed 's|^.*/||'`; \
 361             echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
 362             if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
 363             then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
 364           done; \
 365         else :; fi
 366         @$(NORMAL_UNINSTALL)
 367         @list='$(INFO_DEPS)'; \
 368         for file in $$list; do \
 369           relfile=`echo "$$file" | sed 's|^.*/||'`; \
 370           relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
 371           (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
 372              echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
 373              rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
 374            else :; fi); \
 375         done
 376
 377 uninstall-pdf-am:
 378         @$(NORMAL_UNINSTALL)
 379         @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
 380         for p in $$list; do \
 381           $(am__strip_dir) \
 382           echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
 383           rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
 384         done
 385
 386 uninstall-ps-am:
 387         @$(NORMAL_UNINSTALL)
 388         @list='$(PSS)'; test -n "$(psdir)" || list=; \
 389         for p in $$list; do \
 390           $(am__strip_dir) \
 391           echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
 392           rm -f "$(DESTDIR)$(psdir)/$$f"; \
 393         done
 394
 395 dist-info: $(INFO_DEPS)
 396         @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
 397         list='$(INFO_DEPS)'; \
 398         for base in $$list; do \
 399           case $$base in \
 400             $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
 401           esac; \
 402           if test -f $$base; then d=.; else d=$(srcdir); fi; \
 403           base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
 404           for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
 405             if test -f $$file; then \
 406               relfile=`expr "$$file" : "$$d/\(.*\)"`; \
 407               test -f "$(distdir)/$$relfile" || \
 408                 cp -p $$file "$(distdir)/$$relfile"; \
 409             else :; fi; \
 410           done; \
 411         done
 412
 413 mostlyclean-aminfo:
 414         -rm -rf libadplug.aux libadplug.cp libadplug.cps libadplug.fn libadplug.fns \
 415           libadplug.ky libadplug.kys libadplug.log libadplug.pg \
 416           libadplug.pgs libadplug.tmp libadplug.toc libadplug.tp \
 417           libadplug.tps libadplug.vr libadplug.vrs
 418
 419 clean-aminfo:
 420         -test -z "libadplug.dvi libadplug.pdf libadplug.ps libadplug.html" \
 421         || rm -rf libadplug.dvi libadplug.pdf libadplug.ps libadplug.html
 422
 423 maintainer-clean-aminfo:
 424         @list='$(INFO_DEPS)'; for i in $$list; do \
 425           i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
 426           echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
 427           rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
 428         done
 429 install-man1: $(man_MANS)
 430         @$(NORMAL_INSTALL)
 431         test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
 432         @list=''; test -n "$(man1dir)" || exit 0; \
 433         { for i in $$list; do echo "$$i"; done; \
 434         l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
 435           sed -n '/\.1[a-z]*$$/p'; \
 436         } | while read p; do \
 437           if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
 438           echo "$$d$$p"; echo "$$p"; \
 439         done | \
 440         sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
 441               -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
 442         sed 'N;N;s,\n, ,g' | { \
 443         list=; while read file base inst; do \
 444           if test "$$base" = "$$inst"; then list="$$list $$file"; else \
 445             echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
 446             $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
 447           fi; \
 448         done; \
 449         for i in $$list; do echo "$$i"; done | $(am__base_list) | \
 450         while read files; do \
 451           test -z "$$files" || { \
 452             echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
 453             $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
 454         done; }
 455
 456 uninstall-man1:
 457         @$(NORMAL_UNINSTALL)
 458         @list=''; test -n "$(man1dir)" || exit 0; \
 459         files=`{ for i in $$list; do echo "$$i"; done; \
 460         l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
 461           sed -n '/\.1[a-z]*$$/p'; \
 462         } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
 463               -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
 464         test -z "$$files" || { \
 465           echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \
 466           cd "$(DESTDIR)$(man1dir)" && rm -f $$files; }
 467 tags: TAGS
 468 TAGS:
 469
 470 ctags: CTAGS
 471 CTAGS:
 472
 473
 474 distdir: $(DISTFILES)
 475         @list='$(MANS)'; if test -n "$$list"; then \
 476           list=`for p in $$list; do \
 477             if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
 478             if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
 479           if test -n "$$list" && \
 480             grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
 481             echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
 482             grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
 483             echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
 484             echo "       typically \`make maintainer-clean' will remove them" >&2; \
 485             exit 1; \
 486           else :; fi; \
 487         else :; fi
 488         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 489         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 490         list='$(DISTFILES)'; \
 491           dist_files=`for file in $$list; do echo $$file; done | \
 492           sed -e "s|^$$srcdirstrip/||;t" \
 493               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 494         case $$dist_files in \
 495           */*) $(MKDIR_P) `echo "$$dist_files" | \
 496                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 497                            sort -u` ;; \
 498         esac; \
 499         for file in $$dist_files; do \
 500           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 501           if test -d $$d/$$file; then \
 502             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 503             if test -d "$(distdir)/$$file"; then \
 504               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 505             fi; \
 506             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 507               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
 508               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 509             fi; \
 510             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 511           else \
 512             test -f "$(distdir)/$$file" \
 513             || cp -p $$d/$$file "$(distdir)/$$file" \
 514             || exit 1; \
 515           fi; \
 516         done
 517         $(MAKE) $(AM_MAKEFLAGS) \
 518           top_distdir="$(top_distdir)" distdir="$(distdir)" \
 519           dist-info
 520 check-am: all-am
 521 check: check-am
 522 all-am: Makefile $(INFO_DEPS) $(MANS)
 523 installdirs:
 524         for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"; do \
 525           test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 526         done
 527 install: install-am
 528 install-exec: install-exec-am
 529 install-data: install-data-am
 530 uninstall: uninstall-am
 531
 532 install-am: all-am
 533         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 534
 535 installcheck: installcheck-am
 536 install-strip:
 537         $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 538           install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 539           `test -z '$(STRIP)' || \
 540             echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
 541 mostlyclean-generic:
 542         -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
 543
 544 clean-generic:
 545         -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
 546
 547 distclean-generic:
 548         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 549         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 550         -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
 551
 552 maintainer-clean-generic:
 553         @echo "This command is intended for maintainers to use"
 554         @echo "it deletes files that may require special tools to rebuild."
 555         -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
 556 clean: clean-am
 557
 558 clean-am: clean-aminfo clean-generic clean-libtool mostlyclean-am
 559
 560 distclean: distclean-am
 561         -rm -f Makefile
 562 distclean-am: clean-am distclean-generic
 563
 564 dvi: dvi-am
 565
 566 dvi-am: $(DVIS)
 567
 568 html: html-am
 569
 570 html-am: $(HTMLS)
 571
 572 info: info-am
 573
 574 info-am: $(INFO_DEPS)
 575
 576 install-data-am: install-info-am install-man
 577
 578 install-dvi: install-dvi-am
 579
 580 install-dvi-am: $(DVIS)
 581         @$(NORMAL_INSTALL)
 582         test -z "$(dvidir)" || $(MKDIR_P) "$(DESTDIR)$(dvidir)"
 583         @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
 584         for p in $$list; do \
 585           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 586           echo "$$d$$p"; \
 587         done | $(am__base_list) | \
 588         while read files; do \
 589           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
 590           $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
 591         done
 592 install-exec-am:
 593
 594 install-html: install-html-am
 595
 596 install-html-am: $(HTMLS)
 597         @$(NORMAL_INSTALL)
 598         test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
 599         @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
 600         for p in $$list; do \
 601           if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
 602           $(am__strip_dir) \
 603           if test -d "$$d$$p"; then \
 604             echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
 605             $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
 606             echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
 607             $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
 608           else \
 609             list2="$$list2 $$d$$p"; \
 610           fi; \
 611         done; \
 612         test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
 613         while read files; do \
 614           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
 615           $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
 616         done; }
 617 install-info: install-info-am
 618
 619 install-info-am: $(INFO_DEPS)
 620         @$(NORMAL_INSTALL)
 621         test -z "$(infodir)" || $(MKDIR_P) "$(DESTDIR)$(infodir)"
 622         @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
 623         list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
 624         for file in $$list; do \
 625           case $$file in \
 626             $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
 627           esac; \
 628           if test -f $$file; then d=.; else d=$(srcdir); fi; \
 629           file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
 630           for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
 631                        $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
 632             if test -f $$ifile; then \
 633               echo "$$ifile"; \
 634             else : ; fi; \
 635           done; \
 636         done | $(am__base_list) | \
 637         while read files; do \
 638           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
 639           $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
 640         @$(POST_INSTALL)
 641         @if (install-info --version && \
 642              install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
 643           list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
 644           for file in $$list; do \
 645             relfile=`echo "$$file" | sed 's|^.*/||'`; \
 646             echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
 647             install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
 648           done; \
 649         else : ; fi
 650 install-man: install-man1
 651
 652 install-pdf: install-pdf-am
 653
 654 install-pdf-am: $(PDFS)
 655         @$(NORMAL_INSTALL)
 656         test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
 657         @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
 658         for p in $$list; do \
 659           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 660           echo "$$d$$p"; \
 661         done | $(am__base_list) | \
 662         while read files; do \
 663           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
 664           $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
 665 install-ps: install-ps-am
 666
 667 install-ps-am: $(PSS)
 668         @$(NORMAL_INSTALL)
 669         test -z "$(psdir)" || $(MKDIR_P) "$(DESTDIR)$(psdir)"
 670         @list='$(PSS)'; test -n "$(psdir)" || list=; \
 671         for p in $$list; do \
 672           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 673           echo "$$d$$p"; \
 674         done | $(am__base_list) | \
 675         while read files; do \
 676           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
 677           $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
 678 installcheck-am:
 679
 680 maintainer-clean: maintainer-clean-am
 681         -rm -f Makefile
 682 maintainer-clean-am: distclean-am maintainer-clean-aminfo \
 683         maintainer-clean-generic maintainer-clean-vti
 684
 685 mostlyclean: mostlyclean-am
 686
 687 mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \
 688         mostlyclean-libtool mostlyclean-vti
 689
 690 pdf: pdf-am
 691
 692 pdf-am: $(PDFS)
 693
 694 ps: ps-am
 695
 696 ps-am: $(PSS)
 697
 698 uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
 699         uninstall-man uninstall-pdf-am uninstall-ps-am
 700
 701 uninstall-man: uninstall-man1
 702
 703 .MAKE: install-am install-strip
 704
 705 .PHONY: all all-am check check-am clean clean-aminfo clean-generic \
 706         clean-libtool dist-info distclean distclean-generic \
 707         distclean-libtool distdir dvi dvi-am html html-am info info-am \
 708         install install-am install-data install-data-am install-dvi \
 709         install-dvi-am install-exec install-exec-am install-html \
 710         install-html-am install-info install-info-am install-man \
 711         install-man1 install-pdf install-pdf-am install-ps \
 712         install-ps-am install-strip installcheck installcheck-am \
 713         installdirs maintainer-clean maintainer-clean-aminfo \
 714         maintainer-clean-generic maintainer-clean-vti mostlyclean \
 715         mostlyclean-aminfo mostlyclean-generic mostlyclean-libtool \
 716         mostlyclean-vti pdf pdf-am ps ps-am uninstall uninstall-am \
 717         uninstall-dvi-am uninstall-html-am uninstall-info-am \
 718         uninstall-man uninstall-man1 uninstall-pdf-am uninstall-ps-am
 719
 720
 721 adplugdb.1: Makefile $(srcdir)/adplugdb.1.in
 722         rm -f adplugdb.1 adplugdb.1.tmp
 723         $(edit) $(srcdir)/adplugdb.1.in >adplugdb.1.tmp
 724         mv adplugdb.1.tmp adplugdb.1
 725
 726 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 727 # Otherwise a system limit (for SysV at least) may be exceeded.
 728 .NOEXPORT: