src/0tesuto.c

   1 /* Project 16 Source Code~\r
   2  * Copyright (C) 2012-2017 sparky4 & pngwen & andrius4669 & joncampbell123 & yakui-lover\r
   3  *\r
   4  * This file is part of Project 16.\r
   5  *\r
   6  * Project 16 is free software; you can redistribute it and/or modify\r
   7  * it under the terms of the GNU General Public License as published by\r
   8  * the Free Software Foundation; either version 3 of the License, or\r
   9  * (at your option) any later version.\r
  10  *\r
  11  * Project 16 is distributed in the hope that it will be useful,\r
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of\r
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\r
  14  * GNU General Public License for more details.\r
  15  *\r
  16  * You should have received a copy of the GNU General Public License\r
  17  * along with this program.  If not, see <http://www.gnu.org/licenses/>, or\r
  18  * write to the Free Software Foundation, Inc., 51 Franklin Street,\r
  19  * Fifth Floor, Boston, MA 02110-1301 USA.\r
  20  *\r
  21  */\r
  22 \r
  23 #include <hw/cpu/cpu.h>\r
  24 #include <hw/dos/dos.h>\r
  25 #include <hw/vga/vga.h>\r
  26 #include <hw/vga/vrl.h>\r
  27 \r
  28 #include "src/tesuto.h"\r
  29 \r
  30 //#define FILENAME_1 "data/aconita.vrl"\r
  31 //#define FILENAME_2 "data/aconita.pal"\r
  32 #define FILENAME_1 "data/spri/chistnd.vrl"\r
  33 #define FILENAME_2 "data/spri/chikyuu.pal"\r
  34 \r
  35 //#define ZSP\r
  36 \r
  37 #define INITTNUM 1\r
  38 \r
  39 map_view_t mv[4];\r
  40 map_t map;//junk var\r
  41 \r
  42 int main(int argc,char **argv)\r
  43 {\r
  44         static global_game_variables_t gvar;\r
  45         struct vrl1_vgax_header *vrl_header;\r
  46         vrl1_vgax_offset_t *line_offsets;\r
  47         unsigned char *buffer;\r
  48         unsigned int bufsz;\r
  49         int fd;\r
  50         //nibble i;\r
  51         //char *bakapee1,*bakapee2;\r
  52         char bakapee1[64] = FILENAME_1;\r
  53         char bakapee2[64] = FILENAME_2;\r
  54 \r
  55         boolean anim=1,noanim=0;\r
  56 #ifdef ZSP\r
  57         boolean zerostoppause=1;\r
  58 #endif\r
  59 \r
  60         if (argc >= 2) {\r
  61 /*      if (argc < 2) {\r
  62                 //fprintf(stderr,"drawvrl <VRL file> <palette file>\n palette file optional\n");\r
  63                 bakapee1 = FILENAME_1;//"data/aconita.vrl";\r
  64                 bakapee2 = FILENAME_2;//"data/aconita.pal";\r
  65 \r
  66         }else{\r
  67                 if(argv[1]) bakapee1 = argv[1];\r
  68                 if(argv[2]) bakapee2 = argv[2];*/\r
  69                 if(argv[1]){ strcpy(bakapee1, argv[1]);//bakapee1[] = *argv[1];\r
  70                 if(argv[2]) strcpy(bakapee2, argv[2]); }//bakapee2[] = argv[2]; }\r
  71         }\r
  72 \r
  73         fd = open(bakapee1,O_RDONLY|O_BINARY);\r
  74         if (fd < 0) {\r
  75                 fprintf(stderr,"Unable to open '%s'\n", bakapee1);\r
  76                 return 1;\r
  77         }\r
  78         {\r
  79                 unsigned long sz = lseek(fd,0,SEEK_END);\r
  80                 if (sz < sizeof(*vrl_header)) return 1;\r
  81                 if (sz >= 65535UL) return 1;\r
  82 \r
  83                 bufsz = (unsigned int)sz;\r
  84                 buffer = malloc(bufsz);\r
  85                 if (buffer == NULL) return 1;\r
  86 \r
  87                 lseek(fd,0,SEEK_SET);\r
  88                 if ((unsigned int)read(fd,buffer,bufsz) < bufsz) return 1;\r
  89 \r
  90                 vrl_header = (struct vrl1_vgax_header*)buffer;\r
  91                 if (memcmp(vrl_header->vrl_sig,"VRL1",4) || memcmp(vrl_header->fmt_sig,"VGAX",4)) return 1;\r
  92                 if (vrl_header->width == 0 || vrl_header->height == 0) return 1;\r
  93         }\r
  94         close(fd);\r
  95 \r
  96         probe_dos();\r
  97         if (!probe_vga()) {\r
  98                 printf("VGA probe failed\n");\r
  99                 return 1;\r
 100         }\r
 101         VGAmodeX(1, 1, &gvar);\r
 102         VL_modexPalScramble(gvar.video.palette);\r
 103 \r
 104         /* load color palette */\r
 105         VL_LoadPalFile(bakapee2, &gvar.video.palette, &gvar);\r
 106 \r
 107         /* preprocess the sprite to generate line offsets */\r
 108         line_offsets = vrl1_vgax_genlineoffsets(vrl_header,buffer+sizeof(*vrl_header),bufsz-sizeof(*vrl_header));\r
 109         if (line_offsets == NULL) return 1;\r
 110 \r
 111         IN_Startup(&gvar);\r
 112         IN_Default(0,&gvar.player[0],ctrl_Keyboard1, &gvar);\r
 113         EN_initPlayer(&gvar.player[0], &gvar.video);\r
 114 \r
 115         /* setup camera and screen~ */\r
 116         modexHiganbanaPageSetup(&gvar);\r
 117         ZC_MVSetup(&gvar.mv, &map, &gvar);\r
 118         ZC_ShowMV(&gvar.mv, gvar.video.sp, 0);\r
 119 \r
 120 //      VL_PatternDraw(video_t *video, word pn, boolean sw, boolean allsw);\r
 121         VL_PatternDraw(&gvar.video, 0/*gvar.video.sp*/, 0, 1);\r
 122         TESTBG34\r
 123         DRAWCORNERBOXES\r
 124 \r
 125         /* make distinctive pattern offscreen, render sprite, copy onscreen.\r
 126          * this time, we render the distinctive pattern to another offscreen location and just copy.\r
 127          * note this version is much faster too! */\r
 128         {\r
 129                 unsigned int i,o,o2;\r
 130                 int x,y,rx,ry,w,h;\r
 131                 unsigned int overdraw = 1;      // how many pixels to "overdraw" so that moving sprites with edge pixels don't leave streaks.\r
 132                                                 // if the sprite's edge pixels are clear anyway, you can set this to 0.\r
 133                 VGA_RAM_PTR omemptr;\r
 134                 int xdir=1,ydir=1;\r
 135 \r
 136 //              VL_PatternDraw(video_t *video, word pn, boolean sw, boolean allsw);\r
 137 //              VL_PatternDraw(&gvar.video, 0, 1, 1);\r
 138 //              TESTBG;\r
 139 //              DRAWCORNERBOXES;\r
 140 \r
 141                 /* starting coords. note: this technique is limited to x coordinates of multiple of 4 */\r
 142                 x = -(gvar.video.page[0].dx);\r
 143                 y = -(gvar.video.page[0].dy);\r
 144 \r
 145                 /* do it */\r
 146                 omemptr = vga_state.vga_graphics_ram; // save original mem ptr\r
 147 \r
 148                 while(!gvar.in.inst->Keyboard[sc_Escape])\r
 149                 {\r
 150                         IN_ReadControl(&gvar.player[0], &gvar);\r
 151                         if(gvar.in.inst->Keyboard[68]){ gvar.kurokku.fpscap=!gvar.kurokku.fpscap; IN_UserInput(1, &gvar); } //f10\r
 152                         TAIL_PANKEYFUN;\r
 153                         if(gvar.in.inst->Keyboard[sc_Space]\r
 154 #ifdef ZSP\r
 155                                 || zerostoppause\r
 156 #endif\r
 157 )       //space\r
 158                         {\r
 159                                 anim=!anim;\r
 160                                 DRAWCORNERBOXES;\r
 161 #ifdef ZSP\r
 162                                 if(!zerostoppause) IN_UserInput(1, &gvar); else zerostoppause=0;\r
 163 #endif\r
 164                         }\r
 165                         if(gvar.in.inst->Keyboard[sc_R]){\r
 166                                 gvar.video.page[0].dx=gvar.video.page[0].dy=gvar.video.page[1].dx=gvar.video.page[1].dy=16;\r
 167                                 gvar.mv[0].tx = gvar.mv[0].ty = gvar.mv[1].tx = gvar.mv[1].ty = INITTNUM;\r
 168                                 VL_ShowPage(&gvar.video.page[gvar.video.sp], 1, 0);\r
 169                                 gvar.player[0].enti.q = 1; gvar.player[0].enti.d = 2;\r
 170                                 x=y=0;\r
 171                                 xdir=ydir=1;\r
 172                         } //R\r
 173                         TAIL_FUNCTIONKEYFUNCTIONS0EXE;\r
 174 \r
 175                         if(anim && !noanim)\r
 176                         {\r
 177                                 /* render box bounds. y does not need modification, but x and width must be multiple of 4 */\r
 178                                 if (x >= overdraw) rx = (x - overdraw) & (~3);\r
 179                                 else rx = -(gvar.video.page[0].dx);\r
 180                                 if (y >= overdraw) ry = (y - overdraw);\r
 181                                 else ry = -(gvar.video.page[0].dy);\r
 182                                 h = vrl_header->height + overdraw + y - ry;\r
 183                                 w = (x + vrl_header->width + (overdraw*2) + 3/*round up*/ - rx) & (~3);\r
 184                                 if ((rx+w) > gvar.video.page[0].width) w = gvar.video.page[0].width-rx;\r
 185                                 if ((ry+h) > gvar.video.page[0].height) h = gvar.video.page[0].height-ry;\r
 186 \r
 187                                 /* block copy pattern to where we will draw the sprite */\r
 188                                 vga_setup_wm1_block_copy();\r
 189                                 o2 = gvar.video.page[0].pagesize+gvar.video.page[1].pagesize;\r
 190                                 o = ((uint16_t)gvar.video.page[2].data) + (ry * gvar.video.page[0].stridew) + (rx >> 2); // source offscreen            0x10000UL -\r
 191                                 for (i=0;i < h;i++,o += gvar.video.page[0].stridew,o2 += (w >> 2)) vga_wm1_mem_block_copy(o2,o,w >> 2);\r
 192                                 /* must restore Write Mode 0/Read Mode 0 for this code to continue drawing normally */\r
 193                                 vga_restore_rm0wm0();\r
 194 \r
 195                                 /* replace VGA stride with our own and mem ptr. then sprite rendering at this stage is just (0,0) */\r
 196                                 vga_state.vga_draw_stride_limit = (gvar.video.page[0].width + 3/*round up*/ - x) >> 2;\r
 197                                 vga_state.vga_draw_stride = w >> 2;\r
 198                                 vga_state.vga_graphics_ram = omemptr + gvar.video.page[0].pagesize + gvar.video.page[1].pagesize;\r
 199 \r
 200                                 /* then the sprite. note modding ram ptr means we just draw to (x&3,0) */\r
 201 draw_vrl1_vgax_modex(x-rx,y-ry,vrl_header,line_offsets,buffer+sizeof(*vrl_header),bufsz-sizeof(*vrl_header));\r
 202 //printf("x=%d  y=%d    rx=%d   ry=%d\n", x, y, rx, ry);\r
 203 \r
 204                                 /* restore ptr */\r
 205                                 vga_state.vga_graphics_ram = omemptr;\r
 206 \r
 207                                 /* block copy to visible RAM from offscreen */\r
 208                                 vga_setup_wm1_block_copy();\r
 209                                 o = gvar.video.page[0].pagesize+gvar.video.page[1].pagesize; // source offscreen\r
 210                                 o2 = (ry * gvar.video.page[0].stridew) + (rx >> 2); // dest visible (original stride)\r
 211                                 for (i=0;i < h;i++,o += vga_state.vga_draw_stride,o2 += gvar.video.page[0].stridew) vga_wm1_mem_block_copy(o2,o,w >> 2);\r
 212                                 /* must restore Write Mode 0/Read Mode 0 for this code to continue drawing normally */\r
 213                                 vga_restore_rm0wm0();\r
 214 \r
 215                                 /* restore stride */\r
 216                                 vga_state.vga_draw_stride_limit = vga_state.vga_draw_stride = gvar.video.page[0].stridew;\r
 217 \r
 218                                 /* step */\r
 219                                 x += xdir; y += ydir;\r
 220                                 if ((x + vrl_header->width) >= ((gvar.video.page[0].width + gvar.video.page[0].dx) - 1) || x == -(gvar.video.page[0].dx))\r
 221                                         xdir = -xdir;\r
 222                                 if ((y + vrl_header->height) >= ((gvar.video.page[0].height + gvar.video.page[0].dy) - 1) || y == -(gvar.video.page[0].dy))\r
 223                                         ydir = -ydir;\r
 224                                 //printf("[x%u y%u]     [rx%u ry%u]             [w%u h%u]\n", x, y, rx, ry, w, h);\r
 225                         }\r
 226                 }\r
 227         }\r
 228 \r
 229         IN_UserInput(1, &gvar);\r
 230 \r
 231 //===========================================================================//\r
 232 \r
 233         ZC_ShowMV(&gvar.mv, 0, 0);\r
 234 if(!noanim) {\r
 235         /* another handy "demo" effect using VGA write mode 1.\r
 236          * we can take what's on screen and vertically squash it like an old analog TV set turning off. */\r
 237         {\r
 238                 unsigned int blank_line_ofs = (gvar.video.page[0].stridew * gvar.video.page[0].height * 2);\r
 239                 unsigned int copy_ofs = (gvar.video.page[0].stridew * gvar.video.page[0].height);\r
 240                 unsigned int display_ofs = 0x0000;\r
 241                 unsigned int i,y,soh,doh,dstart;\r
 242                 unsigned int dh_blankfill = 8;\r
 243                 unsigned int dh_step = 8;\r
 244                 uint32_t sh,dh,yf,ystep;\r
 245 \r
 246                 /* copy active display (0) to offscreen buffer (0x4000) */\r
 247                 vga_state.vga_draw_stride_limit = vga_state.vga_draw_stride = gvar.video.page[0].stridew;\r
 248                 vga_setup_wm1_block_copy();\r
 249                 vga_wm1_mem_block_copy(copy_ofs,display_ofs,gvar.video.page[0].stridew * gvar.video.page[0].height);\r
 250                 vga_restore_rm0wm0();\r
 251 \r
 252                 /* need a blank line as well */\r
 253                 for (i=0;i < gvar.video.page[0].stridew;i++) vga_state.vga_graphics_ram[i+blank_line_ofs] = 0;\r
 254 \r
 255                 sh = dh = gvar.video.page[0].height;\r
 256                 while (dh >= dh_step) {\r
 257                         /* stop animating if the user hits ENTER */\r
 258                         if (kbhit()) {\r
 259                                 if (getch() == 13) break;\r
 260                         }\r
 261 \r
 262                         /* wait for vsync end */\r
 263                         if(gvar.kurokku.fpscap)\r
 264                         vga_wait_for_vsync_end();\r
 265 \r
 266                         /* what scalefactor to use for stretching? */\r
 267                         ystep = (0x10000UL * sh) / dh;\r
 268                         dstart = (gvar.video.page[0].height - dh) / 2; // center the squash effect on screen, otherwise it would squash to top of screen\r
 269                         doh = display_ofs;\r
 270                         soh = copy_ofs;\r
 271                         yf = 0;\r
 272                         y = 0;\r
 273 \r
 274                         /* for performance, keep VGA in write mode 1 the entire render */\r
 275                         vga_setup_wm1_block_copy();\r
 276 \r
 277                         /* blank lines */\r
 278                         if (dstart >= dh_blankfill) y = dstart - dh_blankfill;\r
 279                         else y = 0;\r
 280                         doh = gvar.video.page[0].stridew * y;\r
 281 \r
 282                         while (y < dstart) {\r
 283                                 vga_wm1_mem_block_copy(doh,blank_line_ofs,gvar.video.page[0].stridew);\r
 284                                 doh += gvar.video.page[0].stridew;\r
 285                                 y++;\r
 286                         }\r
 287 \r
 288                         /* draw */\r
 289                         while (y < (dh+dstart)) {\r
 290                                 soh = copy_ofs + ((yf >> 16UL) * gvar.video.page[0].stridew);\r
 291                                 vga_wm1_mem_block_copy(doh,soh,gvar.video.page[0].stridew);\r
 292                                 doh += gvar.video.page[0].stridew;\r
 293                                 yf += ystep;\r
 294                                 y++;\r
 295                         }\r
 296 \r
 297                         /* blank lines */\r
 298                         while (y < gvar.video.page[0].height && y < (dh+dstart+dh_blankfill)) {\r
 299                                 vga_wm1_mem_block_copy(doh,blank_line_ofs,gvar.video.page[0].stridew);\r
 300                                 doh += gvar.video.page[0].stridew;\r
 301                                 y++;\r
 302                         }\r
 303 \r
 304                         /* done */\r
 305                         vga_restore_rm0wm0();\r
 306 \r
 307                         /* wait for vsync */\r
 308                         if(gvar.kurokku.fpscap)\r
 309                         vga_wait_for_vsync();\r
 310 \r
 311                         /* make it shrink */\r
 312                         dh -= dh_step;\r
 313                         if (dh < 40) dh_step = 1;\r
 314                 }\r
 315         }\r
 316 }\r
 317         IN_Shutdown(&gvar);\r
 318         VGAmodeX(0, 1, &gvar);\r
 319         free(line_offsets);\r
 320         buffer = NULL;\r
 321         free(buffer);\r
 322         bufsz = 0;\r
 323 //      free(bakapee1); free(bakapee2);\r
 324         printf("\nProject 16 0.exe. This is just a test file!\n");\r
 325         printf("version %s\n", VERSION);\r
 326         //SCROLLEXITMESG;\r
 327         printf("mv 0\n- tx=%d   ty=%d   dx=%d   dy=%d\n", gvar.mv[0].tx, gvar.mv[0].ty, gvar.video.page[0].dx, gvar.video.page[0].dy);\r
 328         printf("mv 1\n- tx=%d   ty=%d   dx=%d   dy=%d\n", gvar.mv[1].tx, gvar.mv[1].ty, gvar.video.page[1].dx, gvar.video.page[1].dy);\r
 329         return 0;\r
 330 }\r